User's Manual

%($07HUUD,QVWDOODWLRQ8VHU0DQXDO

To change the PIN code stored on your SIM card,
select Menu > Settings > Security > Set PIN.
Enter the existing PIN code, then the new PIN.
Repeat the new PIN to conrm it.
If the PIN code is entered incorrectly three times,
your SIM card can only be unlocked using the PUK
code. Contact your service provider if you do not
have a record of your PUK code. If the PUK code
is entered 10 times incorrectly the SIM will lock
and you should contact your service provider. The
default setting for PIN is o.
Setting up SIM PIN 2 code
The default 4-8 digit code for PIN 2 is 9999.
The default setting is o.
If the PIN 2 code is entered incorrectly three
times, your SIM card can only be unlocked using
the PUK 2 code. Contact your service provider
if you do not have a record of your PUK 2. If
the PUK 2 code is entered 10 times incorrectly
the SIM will lock and you should contact your
service provider. To change the PIN 2 code,
select Menu > Settings > Security > Set PIN 2.
Enter the existing PIN 2 code, then the new PIN
2 code. Repeat the new PIN 2 code to conrm it.

'%74+6;('#674'5%10641..'&
$;6*''44#LNN
Access to your terminal can be restricted by the
keypad lock to prevent accidental dialling (see
“Setting up keypad lock” on page 53 for more
information) or by activation of the admin code.
The admin code can be activated to create a
Phone lock, restrict access to Bluetooth lock,
Reset settings and to create a User code so that
a third party can use the terminal but not have
access to the restricted features. See “Reset all
settings” on page 53 for more information.
Setting up the admin code
Select Menu > Settings > Security and select
Admin code. You will be prompted for the current
code. The default setting is 123456. When this
is accepted, you will be prompted to enter your
new code and then conrm it. The code must be
6 digits long. If you lose your admin code, contact
your service provider. The default setting is o.
The admin code can be entered incorrectly an
unlimited number of times. If you have forgotten
your code, contact your service provider.
Setting up the user code
Select Menu > Settings > Security and select
User code. You will be prompted to enter the
6-digit Admin code. Once this is accepted, you
will be prompted to create a new user code
and to conrm it. The code can be 4-6 digits in
length. The default setting is o. The user code
can be entered incorrectly an unlimited number
of times. If you have forgotten your code,
contact your terminal’s administrator.
'%74+6;('#674'5%10641..'&$;6*'
%#4&
Access to your SIM card can be restricted by
activating its PIN code. The advanced call
feature, Fixed number dialling, can be protected
by your SIM PIN 2 code. See “Fixed number
dialling” on page 39 for more information.
Setting up SIM PIN code
Select Menu > Settings > Security > PIN request
and select On. You will be asked to enter your
SIM’s PIN code. If you make an error entering the
number, press Cancel to clear the digits and re-
enter. Press the centre selection key or OK. The
default 4-8 digit code for SIM PIN is 8888. The
default setting is o.