User's Manual


'44#LNN(70%6+10-';2#&
Location Button
mode
Action LED/Sound
Mute press
on/o
In a call:
Mute the microphone (uplink) on the privacy handset.
LED turns RED - Muted
LED turns OFF - Not muted
LED ashing Yellow - RJ11/POTS in use
OR
Up/Down
In a call:
Increase/decrease volume on speakerphone or privacy handset.
Audio will sound louder/quieter with each press.
Out of call:
Increase/decrease volume of incoming ring tone on the
speakerphone.
A beep will sound indicating the increased/decreased ring tone volume
 
Brightness
dual button
simultaneous
press
(1 second)
Out of call:
Enter LED brightness change mode. Press UP and DOWN
arrows to vary intensity. Mode will automatically exit after 5
seconds after the last button press.
All LED’s will change to WHITE and a single beep will sound when
entering brightness change mode.
A short double beep will sound when exiting change mode.
Speakerphone
press ON/OFF
In a call:
Terminate call if speakerphone mode is active
Activate speakerphone mode if Privacy Handset mode is active.
LED turns GREEN - Speakerphone mode active
LED turns OFF - Speakerphone mode not active
Out of call:
Answer inbound call in speakerphone mode