IsatDock DRIVE User Manual
Inmarsat IsatDock Drive Installation and User Manual Product name: IsatDock Drive Manual revision: 01 Part Number: USRMAN006001 Release date: October 2010 BEAM Communications Pty Ltd 8 Anzed Court, Mulgrave, Victoria, 3170, AUSTRALIA Information furnished by BEAM Communications Pty Ltd (BEAM) is believed to be accurate and reliable. However, no responsibility is assumed by BEAM for its use, or for any infringement of patents or other rights of third parties, which may result from its use.
About Beam Communications Beam Communications, a wholly owned subsidiary of World Reach Limited (WRR), listed on the Australian Stock Exchange, is a world leader in design, manufacture and distribution of specialised communications equipment for the Inmarsat Satellite Network. Beam’s commitment to be at the forefront has continued to increase its share of the global satellite communications market. Its premium distribution network spans the world.
Conventions in this Manual These notes will appear throughout this manual and should be taken into consideration. Warning or Caution This symbol and associated text indicate a warning note providing information to prevent damage to equipment or personal injury. Note/Important/Tip Header This symbol and associated text indicate a note providing general operating information. Interference Header All wireless phones may get interference, which could affect performance.
Package Contents Optional Accessories Other Resources Available Online Check that your IsatDock DRIVE package contains all of the following items: The following optional accessories are available for your IsatDock DRIVE • Transport Active Antenna (Magnetic) • Transport Active Antenna (Bolt) • ISD932 6m cable kit (Active) • ISD933 13m cable kit (Active) • ISD934 18m cable kit (Active) • ISD935 31m cable kit (Active) • ISD955 Privacy handset • RST410 “Man Down” pendant kit • LTO LeoTRAK-Online See your se
CONTENTS Inmarsat IsatDock Drive Part Number 2 Aircraft About Beam Communications 3 Vehicles Equipped with an Air Bag Conventions in this Manual 4 5 Equipment Overview 13 Additional Information Installation Guidelines 14 Routing Cables (for vehicle installations) Other Resources Available Online Safety Information Safety Inmarsat Transceiver IsatPhone Pro IsatDock FCC Information Electronic Devices Pacemakers Other Medical Devices Vehicles Posted Facilities 7 15 Installing the IsatDock DRI
Safety Information IMPORTANT! Please read the following information carefully before installing and using the IsatDock DRIVE. Failing to follow instructions may compromise the safety of the product and may result in personal injury and/or equipment damage. Please consult your supplier if you have any further questions. The IsatDock DRIVE is a low power docking station for the IsatPhone Pro handset. When ON, it will charge the IsatPhone Pro handset whilst docked in the IsatDock DRIVE.
Safety Inmarsat Transceiver IsatPhone Pro Your handset is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. (NOTE: Refer to Inmarsat IsatPhone Pro Manual for additional Information) • The Inmarsat IsatPhone Pro handset has an in-built transceiver which is designed to be used with an external antenna. This antenna transmits RF energy. The Inmarsat antenna (fitted via an extension coaxial cable to the cradle) must be located more than > 0.
IsatDock FCC Information This equipment has been tested and found to comply with the limits for a Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Electronic Devices Other Medical Devices Posted Facilities Most modern electronic equipment is shielded from RF signals. However, certain equipment may not be shielded against the RF signals from your wireless phone. If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
IsatDock DRIVE Key Features Integrated Handsfree IsatDock DRIVE is an intelligent compact docking station specifically designed for the Inmarsat IsatPhone Pro satellite handset. IsatDock DRIVE allows the IsatPhone Pro handset to be used in a vehicle, enabling quality hands-free calls with echo cancellation and noise reduction support.
Tracking / Alert Monitoring IsatDock DRIVE has an in-built GPS module that can provide tracking, monitoring and alert management in various land and sea based applications within various types of vehicles, vessels or fixed site locations. The GPS module provides accurate positioning and enables tracking worldwide. The tracking function has to be configured and enabled on the IsatDock DRIVE via the IDMS.
Equipment Overview 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. IsatDock DRIVE unit Key Lock IsatPhone Eject Button IsatPhone Pro IsatPhone Pro Docking Tray Function Buttons Status Indication Light Power Cable Loom a. Power Supply b. Satellite TNC-Female Connector c. GPS SMA-Female Connector d. Microphone e. Speaker f. Alert Loop (green & brown) Horn Alert (blue) Radio Mute (white) RAM Mounting Privacy Handset Connection Micro USB Data Connection* * Data services scheduled to be available Q1 2011.
Installation Guidelines This guide outlines the process for installing the IsatDock DRIVE in conjunction with an Inmarsat IsatPhone Pro handset. This kit must not be used with any other device other than the Inmarsat IsatPhone Pro handset. • Only qualified personnel should install communication equipment. If necessary, contact the vehicle manufacturer for air bag information specific to the vehicle. • Ensure that the units are protected from dirt and moisture.
Installation Procedure • • Verify that low resistance connections are present between the battery negative terminal, the vehicle chassis, and the engine block. All wire connections should be clean and tight. For vehicle installation, install provided fuses into the +BATT and ignition sense (accessory) wires. WARNING Do not connect the IsatDock interface power cable to power the unit until the full installation is completed.
Inmarsat Antenna Connection The antenna connections exit from the rear of the IsatDock DRIVE cradle, via the antenna loom. There are two RF connections required, the Satellite TNC – Female Connector and GPS SMA-Female connector. 1. 2. 3. 4. 5. 16 Refer to the antennas installation guide for antenna mounting and location requirements.
External Speaker and Microphone The IsatDock DRIVE cradle comes with an external speaker and microphone for hands-free operation. Marine Active Antenna with Pole Bracket Passive Antenna with Bracket 1. Mount the speaker in the appropriate location and ensure the lead is sufficient to reach the cradle. Magnetic Mount Transport Active Antenna Bolt Mount NOTE The speaker outputs are a Class D amplifier, which must not be connected to chassis/ground.
Privacy Handset (Optional – Extra Order) The IsatDock DRIVE provides a RJ9 audio socket on the bottom of the docking unit, for connection to the Beam privacy handset. This provides a local handset function, conveniently mounted next to the IsatDock DRIVE cradle. 1. The Privacy Handset Kit (purchased/ ordered separately) contains a mounting bracket, space plate, and fasteners. 3.
Horn Alert Output (If required) The IsatDock DRIVE provides a BLUE wire output on the rear cable loom for controlling an external ringer such as a vehicle horn. The horn output is an open collector output capable of sinking up to 120mA current. It CANNOT be connected to the vehicle horn directly and an automotive grade relay must be used to control the horn as shown below.
Connecting Power to the Dock Once all the components are installed, apply power to the IsatDock DRIVE via the 4-way Microfit® connector using the DC power cable. to connect the DC power cable to the vehicle battery power and the IsatDock DRIVE. 1. Connect the 4-way Microfit connector on the DC power cable to the 4-way power connector on the rear cable loom of the IsatDock DRIVE. 2. Route the wire end of the DC power cable to the connection point.
IsatDock DRIVE Usage Tracking & Alert Configuration (optional) Docking & undocking the IsatPhone Pro handset 1. To place the IsatPro Phone into the docking unit, both the ‘covers’ on the external antenna connectors and the USB/Audio connectors need to be opened. 1. The antenna ‘cover’ must be placed at 90 degrees to the antenna connector cavity and run parallel to the top edge of the phone. 2. The ‘cover’ in the base of the phone should be in the a 90 degree opened position. 1 1 2.
Operation of the IsatPhone Pro Prepare the Inmarsat IsatPhone Pro Ensure that the IsatPhone Pro Handset has the latest compatible firmware installed. For more information visit: www.beamcommunications.com/support/ isatdock Starting Up 1. Retract the antenna on the IsatPhone Pro handset. 2. Place the IsatPhone Pro as per instructions “Docking & Undocking” on page 21. 3. Turn vehicle ignition on.
Placing Voice Calls Hands-Free Phone Call – Mobile Originating 1. Dial the number (using the full country codes) on the IsatPhone handset keypad whilst docked. Press the GREEN key to start the connection. 2. A message will display on the IsatPhone handset to indicate the call is progressing. Options: A. During the call, you may transfer the call to the optional privacy handset by taking the privacy handset out of its cup. This automatically directs the call audio to the privacy handset. B.
Tracking and Alert Operations Enable Tracking & Alert The Tracking & Alert function is not enabled by default and it has to be configured and enabled using the IDMS software via the micro-USB connection to the IsatDock DRIVE. Various configuration options are available to the user in the IDMS. The message delivery method is also set using the IDMS. Please refer to the IDMS User Guide for more details on how to configure and enable the Tracking & Alert function on the IsatPhone Pro.
IsatDock DRIVE Front Panel Location Button Mode Action LED/Sound Mute Press on/off In a Call: LED turns RED - Muted Mute the microphone (uplink) on the privacy handset (optional accessory) if connected to cradle. LED turns OFF - Not muted Up In a Call: Audio will sound louder in privacy handset with each press. Increase volume on the external speaker or privacy handset (optional accessory) if connected to cradle. Out of Call: A beep will sound indicating the increased ring tone volume .
IsatDock DRIVE Buttons/LED lights TRACK GREEN RED YELLOW ON Tracking enabled, GPS fix acquired.
Assuring Quality of Inmarsat Service Inmarsat is committed to providing subscribers around the world with consistent, reliable, quality voice and data access all day, every day. The Inmarsat satellite system is monitored for call performance from numerous locations 24 hours a day, 7 days a week in order to achieve this. There are conditions that can compromise the quality of the service you may receive.
Specification Summary Electrical & Environmental Specifications - IsatDock DRIVE Average Power Consumption Current @ 12V Average Watts Power w/o IsatPhone 130mA 1.6W Standby + Charging 360mA 4.3W Transmit + Charging 875mA 10.5W 5mA 60mW N/A 42W Sleep Mode Peak Current 3.5A Physical Specifications Dimensions 230 x 84 x 80 (mm) 9.1 x 3.3 x 3.2 (inches) 670g 1.47lbs 1670g 3.
(1) Physical Dimensions - Drive Dock (2) Physical Dimensions - Privacy Handset 229.12 169.71 42.63 81.
Trouble Shooting This chapter provides information to help you troubleshoot problems you may encounter while running the IsatDock. Q1 How do I know if my IsatPhone is registered on the Inmarsat network? Q4 A The STATUS LED of the docking station will change to GREEN when the handset is registered and able to make calls on the network. The IsatPhone will also indicate “Inmarsat” in the top left corner of the screen display.
Beam Warranty Conditions BEAM Communications gives this express warranty (along 2. BEAM Communications does not warrant any 7.
BEAM Communications Pty Ltd 8 Anzed Court, Mulgrave Victoria, 3170, AUSTRALIA Tel: +61 3 8588 4500 Fax: +61 3 9560 9055 www.beamcommunications.com PART #: USRMAN006001 Web: www.beamcommunications.com Info: info@beamcommunications.com Support: support@beamcommunications.
