User manual
12
Tracking / Alert Monitoring
IsatDock DRIVE has an in-built GPS module
that can provide tracking, monitoring and alert
management in various land and sea based
applications within various types of vehicles,
vessels or xed site locations.
The GPS module provides accurate positioning
and enables tracking worldwide. The tracking
function has to be congured and enabled
on the IsatDock DRIVE via the IDMS. Once turned
ON, tracking and alert messages can be sent to a
phone number, e-mail address, LeoTrak-Online or
any other tracking application via SMS.
Tracking messages can be sent from the
IsatDock DRIVE in the following ways;
1. Periodic position reporting, which is preset
during conguration of the IsatDock DRIVE
2. A current location position can be sent at
any time by pressing the Track button on
the front of the IsatDock DRIVE
The Alert mode can be activated on the
IsatDock DRIVE in the following ways;
1. Use the two button press (know as the Alert
button) on the front of the cradle
2. Use an external alert button/emergency
push button connected to the alert loop
Once activated, alert messages will be sent to
the preset destination continuously until the
alert is disabled either remotely or locally on the
IsatDock DRIVE unit.
LeoTRAK-Online Global
Tracking Portal
LeoTRAK-Online is Beam’s own global web based
alert monitoring and tracking application, which
enables you to track, trace and monitor your asset
anywhere on earth for a small monthly fee
through a simple-to-use web portal.
For more information about LeoTRAK-Online and
associated charges please visit:
www.leotrakonline.com
NOTE
Remote alert/command functionality for disabling
and acknowledgment is scheduled to be available
by a rmware upgrade Q1 2011