IsatDock PRO User Manual
BEAM IsatDock PRO Installation and User Manual Product name: IsatDock PRO Manual revision: 03 Part Number: USRMAN006103 Release date: April 2013 BEAM Communications Pty Ltd 8 Anzed Court, Mulgrave, Victoria, 3170, AUSTRALIA Information furnished by BEAM Communications Pty Ltd (BEAM) is believed to be accurate and reliable. However, no responsibility is assumed by BEAM for its use, or for any infringement of patents or other rights of third parties, which may result from its use.
About Beam Communications Conventions in this Manual These notes will appear throughout this manual and should be taken into consideration. Beam Communications, a wholly owned subsidiary of World Reach Limited (WRR), listed on the Australian Stock Exchange, is a world leader in design, manufacture and distribution of specialised communications equipment for the Inmarsat Satellite Network.
Package Contents Optional Accessories Check that your IsatDock PRO package contains all of the following items: The following optional accessories are available for your IsatDock PRO FF FF FF FF 1 x IsatDock PRO Docking station 1 x 110-240V AC Plug Pack 1 x Privacy Handset 1 x 10-32V DC Power Cable FF 2 x Handset Locking Keys FF 1 x Wall Mounting plate FF User Manual & Quick Start Guide Falcon Configuration Tool is available for download from: http://www.beamcommunications.
Safety Information IMPORTANT! Please read the following information carefully before installing and using the IsatDock PRO. Failing to follow instructions may compromise the safety of the product and may result in personal injury and/or equipment damage. Please consult your supplier if you have any further questions. The IsatDock PRO is a low power docking station for the IsatPhone Pro handset. When ON, it will charge the IsatPhone Pro handset whilst docked in the IsatDock PRO.
IsatDock FCC Information This equipment has been tested and found to comply with the limits for a Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
IsatDock PRO Key Features IsatDock PRO is an intelligent docking station specifically designed for the Inmarsat IsatPhone Pro satellite handset. IsatDock PRO allows the IsatPhone Pro handset to be used in a wide variety of applications. It enables you to use an intelligent RJ11/POTS connection with a standard corded, cordless or DECT handset. Alternatively, it can also be interfaced with a PBX system. IsatDock PRO has an in-built speakerphone for convienent handsfree operation.
Installation Guidelines 14 • • • • Route cables so they are protected from pinching, sharp edges, and crushing. Use grommets wherever a cable must pass through a hole in a metal panel Keep all in-line connectors accessible. For an extra clean installation, a hole may be driven through the surface directly behind the docking station. • (0V) line. Failure to insert a fuse can cause equipment to overheat if a wiring fault exists.
2a) Wall Mounting Orientation ISD700 Directional/Fixed Antenna (Passive) with Bracket ISD715 Magnetic Mounting Transport Antenna (Active) ISD720 Bolt Mounting NOTE Refer to the section “Antenna Installation” for more information on antenna placement and installation. Only Beam approved antenna cables should be used with all docking stations and antennas. 16 WARNING DO NOT pull with force on the cables from the rear of the IsatDock PRO.
3) Privacy Handset & Mounting Cup The Privacy Handset is conveniently mounted on to the IsatDock PRO enclosure, providing a local handset function. The Privacy Handset connects to the docking station via a RJ9 connector. The privacy handset is connected beneath the rear panel of the IsatDock. Once connected, the cable is run back through the foam and placed in the ‘S’ channel through the base of the phone. 1 2 (1) Springless Cup for Normal light-use Desk mounted cradle position.
5) Connect RJ11/POTS Interface 6) USB Port Connection 7) Connecting Power to the Dock Any standard analogue POTS Telephone (POTS = Plain Old Telephone Service) is supported by the IsatDock PRO. It supplies power to the analogue phone as well as ring, dial and busy tones. Route the telephone cabling (up to 600m) from the analogue phone. Mount the analogue phone if required, and plug the RJ11 cable into the IsatDock PRO RJ11 port.
8) Cable Routing The IsatDock provides three different cable routing options when installing the docking station. Cables may exit via path ‘A’ that travels around to the top of the dock allowing for the interface cables to be run with the external antenna connections. Path ‘B’ directs cables out the base of the dock while path ‘C’ results in cables exiting to the side.
Operation of the IsatPhone Pro Prepare the Inmarsat IsatPhone Pro Ensure that the IsatPhone Pro Handset has the latest compatible firmware installed. For more information visit: http://www.beamcommunications.com/ support/pro Starting Up 1. Retract the antenna on the IsatPhone Pro handset. 2. Place the IsatPhone Pro as per instructions “Docking & Undocking” on page 23. 3. Turn vehicle ignition on.
Mute Mode Configuration using Falcon Mute functionality The mute function of the IsatDock PRO allows the user to mute the uplink microphone audio on the privacy handset and/or internal speakerphone microphone. 1. During a call, Press the Mute button on the face of the IsatDock PRO, a RED LED will illuminate the Mute button to confirm that the IsatDock PRO is muted. 2. To exit the mute mode, press the mute button once. Falcon can be downloaded from: http://www.beamcommunications.
IsatDock PRO Front Panel Location IsatDock PRO Buttons/LED lights Button Mode Action Redial (1 second) Out of Call: Up/Down In a Call: Redial previous number dialed. Increase/decrease volume on the internal hardware or privacy handset. OR LED/Sound N/A Audio will sound louder/quieter in privacy handset with each press. Out of Call: Increase/decrease volume of incoming ring tone on the internal hardware speaker.
Specification Summary Assuring Quality of Service There are conditions that can compromise the quality of the service you may receive. These include: • Obstructions • Cabling • RF Interference Obstructions Nearby tall buildings or similar structures, heavily leafed trees and mountains can all degrade performance as they block the signal between the antenna and the satellites. Inmarsat performance is immune from natural environments such as clouds, fog, rain, snow, wind and smoke.
(1) Physical Dimensions - PRO Dock Trouble Shooting (2) Physical Dimensions - Privacy Handset 27.13mm This chapter provides information to help you troubleshoot problems you may encounter while running the IsatDock. 49.70mm How do I know if my IsatPhone Pro is registered on the Inmarsat network? Q4 A The STATUS LED of the docking station will change to GREEN when the handset is registered and able to make calls on the network.
Beam Warranty Conditions 2. BEAM Communications does not warrant any 7.
PART #: USRMAN006103 www.beamcommunications.