User manual

IsatDock PRO - Installation & User Manual
2726
Configuration Using Remote
Commands
Conguration instructions or “Remote
Commands” can be sent to the terminal via
SMS, and most settings are supported that are
normally accessible from Falcon. Please refer to
the Falcon user manual for more information.
NOTE
Due to memory limitations it is recommended
that users have no more than 20 SMS messages
in their inbox. If this amount is exceeded the
processing of remote commands and the ability to
retrieve the messages via the Falcon tool may be
compromised.
Configuration using Falcon
Falcon can be downloaded from:
http://www.beamcommunications.com/
support/pro
Follow the instructions in the downloaded
application to install. Once complete, connect
your PC to the USB port of the terminal and start
Falcon. You can then use the application for a
range of options such as:
• View the status of the terminal (signal,
temperature, input voltage)
• Firmware maintenance
• Congure dierent POTS/RJ11 settings
NOTE
Entering the rmware upgrade mode will be
accompanied by a long beep followed by three
short beeps.
Mute Mode
Mute functionality
The mute function of the IsatDock PRO allows
the user to mute the uplink microphone
audio on the privacy handset and/or internal
speakerphone microphone.
1. During a call, Press the Mute button on the
face of the IsatDock PRO, a RED LED will
illuminate the Mute button to conrm that
the IsatDock PRO is muted.
2. To exit the mute mode, press the mute
button once.
USB Driver Installation
The IsatDock PRO USB data port requires
an interface driver to be installed on the
user’s computer prior to undertaking data
communication. This driver supports the
following operating systems:
Windows XP (SP3 or above) & Windows Vista
You can download the Windows Driver for the
IsatDock from
http://www.beamcommunications.com/
support/pro
IsatDock Key lock
A barrel type lock is situated in the top of the
dock. When locked, the eject button cannot
be depressed and the latch holding the top of
the handset cannot be disengaged from the
IsatPhone Pro. Once locked, the access to the
security bolt beneath the handset is also denied
thus ensuring the PRO/PRO docking station
cannot be removed from the mounting bracket.
Locked
Open