User manual

IsatDock PRO - Installation & User Manual
2928
IsatDock PRO Front Panel
Location Button
Mode
Action LED/Sound
Redial
(1 second)
Out of Call:
Redial previous number dialed.
N/A
OR
Up/Down In a Call:
Increase/decrease volume on the internal hardware or privacy
handset.
Audio will sound louder/quieter in privacy handset with each press.
Out of Call:
Increase/decrease volume of incoming ring tone on the
internal hardware speaker.
A beep will sound indicating the increased/decreased ring tone volume .
Mute
(1 second)
In a Call:
Mute the microphone (uplink) on the privacy handset
LED turns RED - Muted
LED turns OFF - Not muted
LED ashing Yellow - RJ11/POTS in use
+
Brightness
dual button
simultaneous
press
(1 second)
Out of Call:
Enter LED brightness change mode. Press UP and DOWN
arrows to vary intensity. Mode will automatically exit after 5
seconds after the last button press.
All LED’s will change to WHITE and a single beep will sound when entering
brightness change mode.
A short double beep will sound when exiting change mode.
Speakerphone
press ON/OFF
In a Call:
Terminate call if speakerphone mode is active
Activate speakerphone mode if Privacy Handset mode is active.
LED turns GREEN - Speakerphone mode active
LED turns OFF - Speakerphone mode not active
Out of Call:
Answer inbound call in speakerphone mode
IsatDock PRO Buttons/LED lights
REDIAL GREEN RED YELLOW
N/A N/A N/A N/A
MUTE GREEN RED YELLOW
ON
N/A Outgoing audio is
muted
N/A
FLASHING
N/A N/A POTS/RJ11 in use
LED STATUS
GREEN RED YELLOW
ON
Handset registered and
able to make a call
Handset not registered/
no signal and cannot
make or receive calls
N/A
FLASHING
Call in Progress N/A N/A
ALTERNATING
N/A Error detected in
communicating with
IsatPhone Pro handset.
Flashing Red/Blue
N/A
SPEAKER
GREEN RED YELLOW
ON
Speakerphone Mode N/A N/A
1. Mute
2. Redial
3. Speaker Phone Button
4. Up & Down
5. STATUS LED
2
3
1
5
4