User manual
IsatDock PRO - Installation & User Manual
3534
7. BEAM Communications will not accept
responsibility for any invoiced goods or services
that are not covered by a BEAM Communications
written purchase order. Under no circumstances
does BEAM Communications agree to pay for
labour or other related expenses associated with
the troubleshooting and/or repair of our product
without prior specic written authorization.
8. Information in our descriptive literature is based
on product specications that are current at the
time of publication. Product specications, designs
and descriptive literature are subject to change
as improvements are introduced. Although we
announce changes as they occur, we cannot
guarantee notication to every Customer. BEAM
Communications warrants delivered product to
conform to the most current specications, designs
and descriptive literature.
9. This warranty policy may be expanded or limited,
for particular categories of products or Customers,
by information sheets published as deemed
appropriate by BEAM Communications. The
warranty for third party Products is that of the
third party and not BEAM warranty.
2. BEAM Communications does not warrant any
installation, maintenance or service of the Products
not performed by BEAM, nor does it warrant the use
of Products with unapproved ancillary products.
3. BEAM Communications will correct any defects
in material or workmanship of products
manufactured by BEAM which appear within (12)
months and (24) months replacement warranty
for Docking Station units ONLY, from the date
of shipment by BEAM Communications to the
Customer.
BEAM Communications will repair or replace, at
our option, any defective product,provided that
our analysis and/or inspection discloses that such
defects developed under normal and proper use.
4. This warranty does not extend to goods subjected
to liquid or particulate ingress, extreme humidity,
misuse, neglect, accident or improper installation,
or to maintenance or repair of products that have
been altered or repaired by anyone except BEAM
Communications unless otherwise stated in writing.
5. The warranty is a return-to-base warranty and
freight is paid by the sender.
6. A charge of USD $150 including return freight will
be made for testing returned product which is not
defective or is found to be defective as the result
of improper use, maintenance or neglect.
Beam Warranty Conditions
BEAM Communications gives this express warranty (along
with extended warranty endorsements, where applicable)
in lieu of all other warranties, express or implied, including
(without limitation), warranties of merchantability and
tness for a particular purpose. This constitutes our sole
warranty and obligation with regard to our products as
well as the Customer’s sole remedy.
BEAM Communications expressly disclaims all
liability and responsibility for any special, indirect or
consequential damages or any further loss of any kind
whatsoever resulting from the use of our product(s).
The Customer’s sole and exclusive remedy and the
limit of BEAM liability for any loss whatsoever, shall
not exceed the purchase price paid by the Customer
for the product to which a claim is made.
All products manufactured by BEAM Communications
are warranted to be free from defects in material and
workmanship in accordance with and subject to the
following terms and conditions:
1. This warranty is limited to the original Customer
only. It cannot be transferred or assigned to third
parties unless the intent to transfer to a third party
is expressly indicated in a purchase order and/
or warranty-processing arrangements have been
agreed upon in writing by BEAM.