User guide
FX2600 FAX ADAPTER USER GUIDE
14
The Flash is now complete!
NOTE: If the Fax Adapter stops responding, you can use the “RJ11 Emergency Plug” to get the Fax
Adapter to respond to HyperTerminal commands. The “RJ11 Emergency Plug” is a short (2 inch)
piece of wire with an RJ11 connector at one end, as shown in the Fax Adapter Package Contents
section of this guide.
⇒ Remove Power to the Fax Adapter.
⇒ Insert the RJ11 Emergency Plug into the RJ11 jack.
⇒ Apply Power to the Fax Adapter. Fax Adapter should respond with “UPLOAD PROGRAM NOW”.
⇒ Select Transfer -> Send Text File from the Hyperterminal menu and re-upload the firmware.
Current Firmware Version