User guide

FX2600 FAX ADAPTER USER GUIDE
19
Connecting the Fax Adapter – RST310 IntelliDOCK
Before applying power to the Fax Adapter, make sure the RST310 is first powered on and
registered on Iridium Network.
Power
The supplied Serial Data Cable connects from the 9-pin serial connection on the back of the Fax
Adapter to the COMM Port on the rear of the Beam RST310 IntelliDOCK.
DO NOT use the Null Modem adapter in this setup!
One end of the supplied 2-wire
RJ11 cable is plugged into the
RJ11 port on the Fax Adapter,
and the other end is plu
gg
ed into