User guide

FX2600 FAX ADAPTER USER GUIDE
20
Connecting the Fax Adapter – RST978 Hands-free Kit
Before applying power to the Fax Adapter, make sure the HFI is first powered on and the
handset is registered on Iridium Network.
Power
The supplied Serial Data Cable connects from the 9-pin serial connection on the back of the Fax
Adapter to the 9-pin Data Port on the side of the Beam Hands Free Interface (HFI).
DO NOT use the Null Modem adapter in this setup!
One end of the supplied 2-wire
RJ11 cable is plugged into the
RJ11 port on the Fax Adapter,
and the other end is plu
gg
ed into