User guide

FX2600 FAX ADAPTER USER GUIDE
22
Connecting the Fax Adapter – RST600 DataMODEM
Before applying power to the Fax Adapter, make sure the RST620 is first powered on and
given time to register on Iridium Network.
Power
The supplied Serial Data Cable connects from the 9-pin serial connection on the back of the Fax
Adapter to the 9-pin plug on the RST600 Data Cable.
DO NOT use the Null Modem adapter in this setup!
One end of the supplied 2-wire
RJ11 cable is plugged into the
RJ11 port on the Fax Adapter,
and the other end is plu
gg
ed into