User guide

FX2600 FAX ADAPTER USER GUIDE
6
Connecting to the Fax Adapter with Hyperterminal
To configure your Fax Adapter, some settings need to be set using a PC / laptop running
Hyperterminal or an equivalent application. The follow steps guide you through setting up a
Hyperterminal connection to your fax adapter.
If you currently have the power applied to the Fax Adapter, disconnect it before
continuing.
1. Connect the Serial Cable and Null-Modem Adapter between the PC COM port and the Fax
Adapter.
2. Launch Hyperterminal by accessing it from the Start Menu, under Programs -> Accessories ->
Communication or click Start, Run and type in hypertrm and click OK.
3. Once Hyperterminal is open, type in a name for the new Connection as per the illustration below:
Click OK on this screen.
4. Select the COM port you have the Fax Adapter connected to on the following screen.