User guide

FX2600 FAX ADAPTER USER GUIDE
8
Once you have applied power to the Fax Adapter, you should see the following text coming up in the
Hyperterminal window. Note that it can take 15-20 seconds for it all to appear:
The firmware version will be displayed in the first line as highlighted above. If you do not
have at least V.010R please upgrade the firmware to the latest version before continuing.
Refer to the Fax Adapter User’s Guide on how to upgrade the firmware.
Powering up sequence
It is important that the Fax Adapter is not powered up until the Beam device it is connected to is
switched on and Registered on the Iridium Network first.
IMPORTANT: The Fax Adapter must always be the last device to have power applied.