Installation Guide
BEFORE WE START PROGRAMMING THE OPENER
22 beamlabs.io 1-800-436-9186
Before programming the garage door opener please ensure the following steps are completed:
Door is fully closed. Photo eyes are aligned. Trolley sha is engaged with trolley.
Aligned
Steady Red &
Green LED
Emitter
Green LED ON
Sensor
Red LED ON
To engage trolley sha with trolley.
Flip lever on trolley so it is in engage
position (horizontal and pointing at
the opener)
If trolley sha is closer to the opener
(behind the trolley): press and
release “Limit” button and then
press and hold the red “DOWN”
button to move trolley sha towards
the door. There will be an audible
click once the trolley sha is
engaged with trolley.
If trolley sha is closer to the
door (in front of the trolley): press
and release “Limit” button and
then press and hold the green
“UP” button to move trolley sha
towards the opener. There will be
an audible click once the trolley
sha is engaged with trolley.
Trolley in engaged
position
Trolley Sha