Installation Guide

beamlabs.io 1-800-436-9186 3

PREPARE GARAGE DOOR FOR INSTALLATION

TOOLS NEEDED

Step Ladder

Ratchet with

1/4", 7/16" and

1/2" sockets

Level

Pencil

Screwdriver

Hack Saw

Tape Measure

Adjustable Wrench

Rubber MalletDrill 3/16" and

5/16" Drill Bits

Pliers

Hammer

DO NOT REUSE PARTS AND

WIRING FROM AN OLD

OPENER!!!

BEFORE beginning

installation:

1. Disable locks and disengage

trolley from current opener.

2. Perform the following door

test to ensure your door

is balanced and in good

working condition.

Make sure garage door is fully closed before you start the installation

To test your garage door:

1. Raise and lower the door to check if there is any sticking or binding.

2. Check for loose hinges, damaged rollers, frayed cables and damaged or

broken springs.

3. Li the door approximately halfway and release. The door should stay at

that point under proper spring tension.

Call a qualiﬁed garage door service technician if your door binds, sticks or

is unbalanced.