MSDS

MATERIAL SAFETY DATA SHEET

1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT

Product Name:

Terminator Coaster

Intended Use: Bed Bugs Trap

COMPANY IDENTIFICATION

SUPPLIER:

Beapco Co

ADDRESS:

602 Colby Drive, Waterloo ON, N2V 1A2

TELEPHONE:

519 885 5336

FACSIMILE:

519 884 3427

This (M)SDS is a generic document with no country specific information included.

2 COMPOSITION/INFORMATION ON INGREDIENTS

CHEMICAL NAME CAS NUMBER. INGREDIENT PERCENT

glue strip Poly isobutylene 9003-27-4 100

3 HAZARDS IDENTIFICATION

Hazardds Identification: This substantce is considered to be non-hazardous.

Emergency overview: Irriating to eyes, respiratory systems and skins.

4 FIRST AID MEASURES

Skin Exposure: In case of contact, flush with copious amounts of water. If irritation persists, call a physician.

Eye Exposure: In case of conct, flush with copious amounts of water for at least 15 minutes. Assure

adequate flushing by separating the eyelids with fingers. If irritation persists, call a physician.

Inhalation Exposure: if inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is

difficult, give oxygen.

Oral Exposure: If swallon, wash out mouth with water provided person is conscious. call a physician.

Extinguishing Media:

Suitable: water spray, dry chemical powder, appropriate foam or carbon dioxide

Firefighting:

Protective Equipment: wear self-contained breathing apparatus and protective clothing to prevent contact

wth skin and eyes.

Hazardous Decomposition Products: CO, CO

5 FIRE- FIGHTING MEASURES

PAGE 1
MATERIAL SAFETY DATA SHEET 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT Product Name: Intended Use: Terminator Coaster Bed Bugs Trap COMPANY IDENTIFICATION SUPPLIER: Beapco Co ADDRESS: 602 Colby Drive, Waterloo ON, N2V 1A2 TELEPHONE: 519 885 5336 FACSIMILE: 519 884 3427 This (M)SDS is a generic document with no country specific information included. 2 COMPOSITION/INFORMATION ON INGREDIENTS CHEMICAL NAME glue strip Poly isobutylene CAS NUMBER.
PAGE 2
6 ACCIDENTAL RELEASE MEASURES Procedures of Personal Precaution: Wear appropriate protective clothing. Method of Cleaning Up: Mix with inert material (eg. dry sand, vermiculite) and transfer to a dry, clean, lidded container for disposal. Avoid raising dust. Ventilate area and wash spill site after materail pickup is complete. 7 HANDLING AND STORAGE Handling: User Explosure: Avoid contact with eyes. Keep away from ignition sources, heat, light and flame.
PAGE 3
No data available. 13 DISPOSAL CONSIDERATIONS Appropriate Method of Disposal of Substance: dissove or mix the material with a combustible sovent and burn in a chemcial incinerator equipped with and afterburner and scrubber, or contact a licensed professional waste disposal service to dispose of this material.