Reference Manual

IEEE 802.15.4-specific specifications Performance specifications
Digi XBee® 3 RF Module Hardware Reference Manual
13
Performance specifications
The following table describes the performance specifications for the devices.
Specification
XBee 3
XBee 3-PRO
Indoor/urban range Up to 60 m (200 ft)
Up to 90 m (300 ft)
Outdoor RF line-of-sight range Up to 1200 m (4000 ft)
Up to 3200 m (2 mi)
RF Transmit power output (maximum) 6.3 mW (+8 dBm)
79 mW (+19 dBm)
BLEpower output 6.3 mW (+8 dBm) 6.3 mW (+8 dBm)
RF data rate 250,000 b/s
Receiver sensitivity -103 dBm
Note Range figure estimates are based on free-air terrain with limited sources of interference. Actual
range will vary based on transmitting power, orientation of transmitter and receiver, height of
transmitting antenna, height of receiving antenna, weather conditions, interference sources in the
area, and terrain between receiver and transmitter, including indoor and outdoor structures such as
walls, trees, buildings, hills, and mountains.
Power requirements
The following table describes the power requirements for the XBee 3 RF Module.
Specification
XBee 3
XBee 3-PRO
Adjustable power Yes
Supply voltage 2.1 - 3.6 V
Operating current (transmit, typical) 40 mA @ +3.3 V, +8 dBm 135 mA @ +3.3 V, +19 dBm
Operating current (receive, typical)
17 mA
Power-down current, typical 2 µA @ 25° C
Networking and security specifications
The following table describes the networking and security specifications for the devices.
Specification
XBee 3/XBee 3-PRO
Supported network topologies Point-to-point, point-to-multipoint, peer-to-peer, and DigiMesh
Number of channels 16 Direct sequence channels
Interface immunity Direct Sequence Spread Spectrum (DSSS)
Channels 11 to 26
Addressing options PAN ID and addresses, cluster IDs and endpoints (optional)