Replacement Part List

100TB
THE BEAST
Rev: Mar2011
THE BEAST Tow Behind Mower
20
Lubrication Points
To ensure proper lubrication of moving parts, GXi recommends that you lubricate the following components with a high-
quality, EP2 high-temperature-based grease or equivalent. Should the conditions of operation be more severe than
normal, the lubrication interval may need to be shortened. GTR/OPE grease is the recommended lubricant.
Lubrication Point Locations
THE BEAST had fourteen (14) lubrication points.
Lubricate after every 50 hours of usage
1. Front wheels (4 locations, 1 on each
wheel shaft and 1 on each wheel axle)
2. Rear wheels (2 locations, 1 each wheel
axle)
3. Spindles (4 locations). Note: The lower
spindle bearing is sealed on the
bottom and open on the top. The
upper spindle bearing is sealed
on both sides. Failure to
frequently replenish grease will
cause premature lower bearing
failure. Frequent application of
grease to this bearing is critical to achieving long
spindle life in harsh duty environments.
4. Wing belt tensioner (2
locations, 1 on each wing)
5. Blade linkage (1 location)
6. Clutch(1 location)