Use and Care Manual

9
54ZB, 62ZB
Z
-
Beast Finish Mower
Rev: AUG2014
Z- BEAST
Product Specifications
Models
Feature 54ZB 62ZB
Product Type Commercial, 0-turn Commercial, 0-turn
Cutting Width 54-inch 62-inch
Engine See engine manufacturer’s manual See engine manufacturer’s manual
Engine Start Electric Electric
Transmission Type Dual hydraulic Dual hydraulic
Transmission Mfg. GXi GXi
Mower Speeds Infinitely variable Infinitely variable
Deck Type Floating, quick change Floating, quick change
Cutting Height 1.5– 5 inches( ½-inch increments) 1.5– 5 inches( ½-inch increments)
Blade Engagement Manual clutch Manual clutch
Blade Tip Speed 18,750 ft/min 18,750 ft/min
Anti-Scalping Rollers 4 front/2 rear 4 front/2 rear
No. Blades/ Length 3, 18.5-inch blades 3, 21-inch blades
Control System Dual Control Lever Dual Control Lever
Fuel/Capacity Gasoline/7.5 gals. Gasoline/7.5 gals.
Rear Drive Tires 22-inch X 10-inch turf tread 22-inch X 10-inch turf tread
Front Caster Tires 15-inch X 6-inch smooth tread 15-inch X 6-inch smooth tread
Brake System Internal hydraulic and mechanical park Internal hydraulic and mechanical park
Weight 1,200 lbs. 1,200 lbs.
Height/Length 72 inches x 83 inches 72 inches x 83 inches
Note: product specifications may change without notice.
Transmission Specifications
Hydraulic drives:
Pump Displacement—12.1 cc/rev
Motor Displacement—14.6 cc/rev
Overall drive system:
Output torque—Up to 350 lb-ft
Speed—Up to 10 MPH
Axle diameter—1.2 in. (30 mm)