Use and Care Manual

17
54ZB, 62ZB
Z
-
Beast Finish Mower
Rev: AUG2014
Z- BEAST
Item Procedure
Time Interval
Break-in
(first 5 hrs.)
Every 8 hrs.
(daily)
Every 40 hrs.
(weekly)
Every 100 hrs.
(Bi-weekly)
Every 200 hrs.
(monthly)
Belts
Inspect (adjust if
needed)
X X
Blades
Inspect and/or
Sharpen
X
Engine Air Filter
Inspect (see Engine
Owner’s Manual)
X
Engine Cooling Areas
Clean (see Engine
Owner’s Manual)
X
Engine Oil
Check (see Engine
Owner’s Manual)
X X
Change (see Engine
Owner’s Manual)
Engine Oil Filter
Change (see Engine
Owner’s Manual)
Engine Spark Plug
Inspect (see Engine
Owner’s Manual)
Fuel Filter Replace
X
Fuel Line Check
X
Grease Fittings Refer to page 19
Hardware
Check for proper
tightness
X X
Mower Main Frame
Remove debris from
under belt cover
X
Safety Interlock System
Check Operations
and Switches
X
Tires Check Air Pressure
X
Spindle/Blade Brakes
X
Cleaning the Mower
It is recommended that the BEAST lawn mower be cleaned on a daily basis. Excessive accumulation of dirt,
debris, oil, etc. on cutting units, drives, mufflers, and engine may present a potential safety hazard. Also refer to
the engine owners manual for additional cleaning instructions.
Maintenance Schedule