ANGULAR TILE DRILL BEAST FB750W OPERATING MANUAL
CAUTION Carefully read and understand all Safety and Operating Procedures prior to using the BEAST® Angular Tile Drill FB750W. Keep this Manual in a safe place for future reference. Enter the Serial Number of your new BEAST® Angular Tile Drill FB750W in the box below.
TABLE OF CONTENTS 1. BEAST SAFETY Safety Messages ................................................................................................................. 4 Damage Prevention and Information Messages ......................................................................... 4 General Safety Precautions and Hazard Symbols....................................................................... 4 California Proposition 65 Message .........................................................................
BEAST® SAFETY It is extremely important that you read and understand all of the safety instructions, the operating instructions and the maintenance instructions. If these instructions are not followed, serious injuries and/or death could occur to you or to others. Also, failure to read and follow the enclosed maintenance instructions can lead to equipment failure, damage to the equipment or reduced lifetime of the equipment.
BEAST® SAFETY ● KEEPING THE WORK AREA CLEAN. It is important that the working area be clean so as to avoid potential accidents or injuries. ● DO NOT USE THE EQUIPMENT IN DANGEROUS ENVIRONMENTS. It is important that power tools not be used in wet environments. The equipment should never be used in the rain. Also, it is advisable to keep the working area well lit. ● CHILDREN SHOULD BE KEPT AWAY FROM THE WORKING AREA. Only the operator of the equipment should be in the working area.
BEAST® SAFETY ● TOOL MAINTENANCE. It is important to keep tools clean and in good working order. This will result in optimal performance of the machine. Always follow the maintenance instructions for proper tool maintenance. ● REDUCING ACCIDENTAL STARTING OF MACHINE It is important to be sure that the switch is in the OFF position before plugging in the machine. ● EQUIPMENT ACCESSORIES.
BEAST® SAFETY HAZARD SYMBOLS ● READ MANUAL CAREFULLY BEFORE USE Carefully read and understand this operating manual and the enclosed safety instructions prior to using the machine. ● ELECTRICAL SHOCK It is important to never touch electrical components of the machine while the machi- ne is in operation.
BEAST® SAFETY The use of saws and drills generates dust. Excessive airborne particles may cause irritation to eyes, skin and the respiratory tract. To avoid breathing impairment, always us dust controls and protection suitable to the material being sawed or drilled; See OSHA (19 CFR Part 1910.1200). Diamond Blades improperly used are dangerous. Comply with American National Standards Institute Safety Code, B7.
MACHINE SPECIFICATIONS 1. Diamond Tile Bit 2. Water Injection Head 3. Side Grip 4. Main Switch 5. Speed control 6. Water connection 7. Socket Head Screw Driver 3 mm 8. Drilling Guide 9. Water Tank 10. Operating Manual 11. GFCI Switch 12. Carrying Case (not shown) Technical Data: Voltage Motor No Load Speed (stageless) Max. Bit Capacity Spindle Lock Weight [V DC] [W/HP/Amp] [RPM] [Inch-Metric] -[lbs] 115 750/1/7 3,000 - 10,000 2 5/8"- 68 yes 5.2 Dress Stick Diamond Tile Bits 70.12.
OPERATING PROCEDURES CHECK BEFORE USE: Mount the Drill Bit: ● Unpacking: ● Prior to the installation of the diamond Unpack the tile drill and check for missing or damaged parts. ● Power Supply: Make sure that the power supply corresponds with the information on the machine. ● Use the machine only in combination with the supplied water tank (9) or direct connenction to the main water supply. ● Always use the drill guide (8) It is impossible to drill without a drill guide.
OPERATING PROCEDURES ● Plug in the machine ● Reset the GFCI Switch (11) ● Use the table below as a guideline to ● It is important that you do not push on the drilling machine but let the machine do the work. select the RPM for your drill bit diameter and start the machine.
DIAMOND TILE BITS Description Metric Part-Number BEAST® Diamond Tile Bit 1/6” BEAST® Diamond Tile Bit 1/5” BEAST® Diamond Tile Bit 1/4” BEAST® Diamond Tile Bit 5/16” BEAST® Diamond Tile Bit 3/8” BEAST® Diamond Tile Bit 1/2” BEAST® Diamond Tile Bit 5/8” BEAST® Diamond Tile Bit 11/16” BEAST® Diamond Tile Bit 3/4” BEAST® Diamond Tile Bit 7/8” BEAST® Diamond Tile Bit 1” BEAST® Diamond Tile Bit 1 1/8" BEAST® Diamond Tile Bit 1 1/4" BEAST® Diamond Tile Bit 1 3/8” BEAST® Diamond Tile Bit 1 1/2” BEAST® Diamond