Full Product Manual

OPERATING PROCEDURES
PAGE 10 BEAST FB750W OPERATING MANUAL V10/2006R1
CHECK BEFORE USE:
● Unpacking:
Unpack the tile drill and check for missing
or damaged parts.
● Power Supply:
Make sure that the power supply corres-
ponds with the information on the machine.
● Use the machine only in combination
with the supplied water tank (9) or
direct connenction to the main water
supply.
● Always use the drill guide (8)
It is impossible to drill without a drill
guide. You can improvise a drill guide
using a piece of wood or plastic. Make
a V-shaped insertion like illustrated and
tape or clamp the guide onto the tile in
the desired position.
● Always use the GFCI Switch
Mount the Drill Bit:
● Prior to the installation of the diamond
bit it is important that both the machine
adapter and the diamond bit are
cleaned and greased.
● Mount the bit with the flat side opposing
the locking screw.
● Secure the bit using the socket head
screwdriver (7)
● Remove the socket head screwdriver.
● Removal of the bit is done in reverse
order. After use dry and lubricate the bit
before putting it back into the original
packing.
Before changing tools always
unplug the machine
Water Supply:
● When using the water tank (9): Fill the
water tank to the 1.3 gal. level and
pressurize by pumping at least 10 times.
Connect the water tank and the hose to
the drilling unit.