Quick Start Guide

Setting up your Pill

1. POWER ON/OFF

To turn on your Pill™, press and release the power button. The “b” will light up

and an audio cue will indicate the system is on. To turn the Pill™ off, press and

release the power button. The “b” will fade out indicating power is off.

2. BLUETOOTH®

Pairing: For Bluetooth® pairing, press and hold the “b” for 3 secs. The

Bluetooth® LED on the back of the Pill™ will blink WHITE rapidly indicating

device is in pairing mode. Disconnect by holding 3 secs again.

Connected: Once Pill™ is successfully paired and connected, the LED will glow

solid WHITE. *Note: Pill™ can remember up to 8 paired devices in its memory

and will try to connect with most recent.

3. NFC

Connecting: If using a device that is NFC (Near Field Communication)

enabled, turn on NFC, then simply touch the device to the Pill™ on the NFC

logo to quickly make a connection.

Takeover: If the Pill™ is already connected to a Bluetooth® device, one can

take over the connection by NFC touch.

4. AUX INPUT

To play audio using the audio cable, plug the cable from the audio device to the

“IN” jack on the back of the Pill™.

UK English