Quick Start Guide

5
5. LINE OUT
Audio output of the Pill™ can be used to connect to an alternate audio system,
such as a home theater system, or a Beats by Dr. Dre Beatbox®, by plugging the
audio cable into the “OUT” jack on the Pill™ to the “line in” of the audio playback
device of your choice.
6. VOLUME
To adjust volume of the Pill™, use the volume up “+” and volume down “-” buttons
on the top surface of the Pill™. When the “OUT” jack on the Pill™ is being used, the
volume buttons are disabled.
7. BLUETOOTH® CONTROLS
Audio play and pause: To pause and resume playback when connected through
Bluetooth®, press the “b” button.
Phone Calls: Pill™ can be used to make and receive phone calls when connected
through Bluetooth® (audio playback will be paused during calls). Answer/End
Call: Press the “b” button While on a Call: Short press to answer incoming call.
Long press to ignore incoming call. Short press to switch between calls. Switch from
Pill™ to Phone: Double press the “b”
8. CHARGING AND BATTERY
To obtain optimum power capacity, the Pill™ should be charged using the
provided USB cable along with the Power Supply Unit (PSU) in your packaging box.
To charge the Pill™, plug the USB cable from the PSU to the USB port on the back
of the Pill™. While charging, the USB port will glow solid RED. When the Pill™ is fully
charged, the USB port will glow solid GREEN. When the Pill™ is at 20% battery life,
the USB port will blink RED. Battery life is approx. 7 hrs at moderate listening levels.
UK English