User's Manual

9
NS-SB314 Soundbar Home Theater Speaker System with Bluetooth
www.insigniaproducts.com
Mounting your soundbar on a wall (optional)
You will need:
1 Select a location close to your TV and directly in
front of the viewing/listening position. For best
sound quality, choose a location where sound
waves are not blocked by furniture or other
obstacles.
2 Position the supplied wall mount template to
the wall where you want to mount the
soundbar. Make sure the template is level (A),
then tape the template to the wall (B).
3 Drill two holes into the wall, where the template
indicates, then remove the template.
4 Install wall anchors (not included) into the holes
you drilled, using the instructions that came
with your anchors.
5 Secure two screws (not included) to the wall or
wall anchors (if required). The screws must
protrude from the wall by about 1/4”. Use a #10
wood screw (or similar), 1 1/2" in length. The
screw width must be about 3/16” and the screw
head must be approximately 1/4” to 3/8”.
6 Align the speaker hanging brackets with the
screws, then hang the soundbar on the screws.
Notes
• If you have drilled into a stud, wall anchors are
not required.
• If you cannot drill into wall studs and must drill
into drywall, concrete, or another type of wall,
wall anchors are required. See the instructions
that came with your wall anchors to determine
the drill bit size.
Wall mounting template
Level
Stud finder
(optional for
wood stud
installation)
Drill and
drill bit
Hammer
Screwdriver
Tape measure
Tape
Screws (2) - #10 x 1 ½”
wood screw (or
similar)
Wall anchors (2)
BA
Caution
Make sure that you use wall anchors that are suitable
to your wall type if you need to mount the soundbar
to drywall, concrete, or similar wall type.
Warning
Improper installation can result in serious injury or
damage to your soundbar. If necessary, seek the
assistance of a professional.
Approx. 1/4 in
(6.8 mm)
Wall
20.43 inches (519 mm)
NS-SB314_14-0126_MAN_ENG_V1.book Page 9 Tuesday, March 4, 2014 9:26 AM