SFQ-01 / SFQ-01W Save this manual
Safety Information 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Side View: CAUTION - Proper Installation l l l l Install the system in a place which is level, dry and neither too hot nor too cold. The appropriate temperature is between 5 oC and 35 oC. Install the system in a location with adequate ventilation to prevent internal heat from building up inside the unit. Leave sufficient distance between the system and TV. Keep the system away from TV to avoid interference with TV.
Getting Started Warning - When Using the Battery l Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. Package Contents Examine whether the following package contents are all included : l + CR2025 3V Lithium Coin Battery CR2025 l Remote Control Main Unit Adapter Cable l It is loaded on the remote control at the factory.
System Overview Using the Remote Control Front View Storing the remote control Using the remote control l Remove the insulation sheet before using for the first time. l Aim the remote control at the IR Sensor on the front lens within an approximate distance of 7m (23 feet) away. Back View A remote control storage compartment is designed on the right side of system. The remote control can be magnetized into the compartment easily for your quick and convenient use. 5 13 4 Push here.
Remote Control 1. 2. 1 2 3 4 5 6 3. 7 4. 5. 6. 7. (Power) button Switch between power-on and standby modes. (Previous) / (Next) button Skip to the previous/next track in iPhone/ iPod and wireless audio modes. Hold the button to fast-backward/fast-forward a track. Decrease/increase the frequency or select a preset channel number (from 01 to 20) in tuner mode. (Play/Pause) button Play/pause a track when listening to iPhone/ iPod or wireless audio source. Hold to switch the iPod to sleep mode.
Press the Button Unit / Remote Control Functions Start/Pause playback. Hold this button to switch the iPod to sleep mode. Next track/fast forward (press and hold). Previous track/rewind (press and hold). Charging an iPhone/iPod The iPhone/iPod is charged while it is set on the unit when the unit is powered on. l The unit does not support iPod 3G (10/15/20/ 30/40GB) charging mode. l Make sure the AC adapter is connected to the unit.
For SFQ-01W Model ONLY Playing back from 2.4G Wireless Audio Building a 2.4G Wireless Connection Notes: A "receiver" was set in the receiver storage compartment at the factory. l The 2.4G wireless connection can be completed in standby mode or power-on mode. 1. Press the " " button to power on the system from standby mode. 2. Plug the supplied USB dongle into your device. (for example, your computer) l 4. Select 2.
Listening to Tuner Presetting a Station Press the Button Unit / 1. Select tuner mode with the SOURCE button. Functions Remote Control l Switch between the frequency display and channel number display. Tune the desired frequency or channel number based on the different display. Frequency display Channel number display l Hold this button to enter saving mode. Press to save a channel. (see "Presetting a station”) l Select a channel (from 01 to 20). LCD Display 2.
Activating "U-Cubed" Sound Effect "U-Cubed" is an proprietary technology designed to create an ultra wide stereo sound field in digital music systems. With exceptional natural sound reproduction of high definition and fidelity, we create a listening experience where you feel like your speakers are separated much more than they are. To activate UQ3 on: l The unit, turn the " " knob once to activate, turn again to deactivate.