User's Manual

.17. .18.
External DC IN (for AC adapter), AUX IN
DC 18 V 3.3 A (External DC IN)
Input: AC 100-240V, 50/60Hz
Output: DC 18 V 3.3 A
320mm (W) * 168mm (H) * 154mm (D)
2.01Kg (including receiver)
Model
Type
Support Bluetooth
Support Profile
Bluetooth 1.2 and 2.0 compliant
Sound Platform
A2DP
Input Sensitivity/Impedance AUX Input 1200 mV
Tuner
Band
Tuning Range
Frequency Step
Preset Stations
Audio Output Speaker 4 ohms
Input Terminal
Power Source
AC Adapter
Dimensions (Approx.)
Weight
Technical Specifications
SFQ-01/SFQ-01W
FM
87.5 ~ 108.0 MHz
100 KHz
20
Troubleshooting
In These Cases Check the following points
Check this list for a possible troubleshooting solution before calling for service.
• Is the AC adapter plug firmly inserted into DC IN jack of the unit?
• Is the selected dock adapter compatible to your iPhone/iPod?
• Is the dock adapter properly mounted on the unit? Make sure to mount the
dock adapter properly.
• AC adapter is not inserted securely. Plug in securely.
• Is the connector plug of the unit firmly inserted into the connector port of
the iPhone/iPod?
• Is the iPhone/iPod properly functioning? Test the iPhone/iPod functions in
stand-alone condition.
• Is the connector plug of the unit firmly inserted into the connector port of
the iPhone/iPod?
• The path between the remote control and the sensor on the unit is
blocked.
• The battery of remote control is exhausted.
• Remove and reconnect the AC power plug and turn on the system again.
Hard to listen to broadcasts
because of noise.
No sound output.
• The antenna is not properly extended or positioned.
• Tune to the correct radio channel/frequency.
• Making sure the antenna is further away from any equipment that may be
causing the noise or interference.
Cannot set the iPhone/iPod.
Power does not come on.
Cannot operate iPhone/iPod.
iPhone/iPod cannot be
charged.
The system does not react
when the buttons are
pressed.
Unable to operate the
System from the remote
control.
• Check if the volume level is set to the minimum.
• Check if the volume level is muted. Press MUTE button on the unit again to
restore the sound output.
Activating "U-Cubed" Sound Effect
"U-Cubed" is an proprietary technology designed to create an ultra wide stereo sound
field in digital music systems. With exceptional natural sound reproduction of high definition and
fidelity, we create a listening experience where you feel like your speakers are separated much more
than they are.
To activate UQ3 on:
l The unit, turn the " " knob once to activate, turn again to deactivate.
l On the remote or remote App, press the " " button to activate and deactivate
Notes:
l The bass and treble cannot be adjusted when UQ3 is activated.
l In tuner mode, the U-Cubed sound effect can not be activated.