User's Manual

.11.
Press the Button
Functions
Unit Remote Control
Next track/fast forward (press and hold).
Previous track/rewind (press and hold).
/
Notes for Caring Your iPhone/iPod:
l iPod is a trademark of Apple Inc., registered in
the U.S. and other countries.
l iPhone is a trademark of Apple Inc.
l We are not responsible for any loss of or
damage to iPhone/iPod that might result
from the use of this product.
l Sound distortion may occur when playing back
audio sources with high recording levels.
When distortion occurs, it is recommended
to turn off the equalizer of the iPhone/iPod.
For information on operating the iPhone/iPod,
see the iPhone/iPod instruction manual.
l If you do not turn on the power of this unit
and only connect the iPhone/iPod to this
unit, power may be supplied to the iPhone/iPod.
l "Made for iPod" and "Made for iPhone" and
"Made for iPad" mean that an electronic
accessory has been designed to connect
specifically to iPod/iPhone/iPad and has
been certified by the developer to meet
Apple performance standards.
l Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
Charging an iPhone/iPod
The iPhone/iPod is charged while it is set on the
unit when the unit is powered on.
l The unit does not support iPod 3G (10/15/20/
30/40GB) charging mode.
l Make sure the AC adapter is connected to
the unit.
l The iPhone/iPod is charged regardless of the
sound source selected on the unit.
l See the iPhone/iPod instruction manual about
the details of iPhone/iPod charging.
l The connector plug is protected with a cover
when it is first purchased. Please remove the
cover before operating the unit.
l This unit can only play the iPhone/iPod audio.
You can use the iPhone/iPod video function
and hear the audio but cannot play the
video.
l Do not carry the System with iPhone/iPod
connected. You might drop it down or it
might cause damages to the connector part.
l Do not touch or hit the iPhone/iPod terminal
pins or the connector pins directly. It might
cause damages to the connector part.
l If the iPhone/iPod does not play correctly,
please update your iPhone/iPod software to
the latest version. - For details about
updating your iPhone/iPod, check on the
Apple web site <http://www.apple.com>.
Start/Pause playback.
Hold this button to switch the iPod to sleep mode.
.12.
Notes:
l A "receiver" was set in the receiver storage
compartment at the factory.
l The Bluetooth connection can be completed
in standby mode or power-on mode.
l If your mobile phone supports A2DP protocol,
its music will play through the unit.
l You can build a Bluetooth connection with a
mobile phone, an iPad or any other Bluetooth-
enabled devices.
1. Press the " " button to power on the system
from standby mode.
l The pair indicator lights up when the unit is
powered on from the standby mode.
2. Press the PAIR button on the unit to put the
unit into the pair mode.
l The Pair indicator starts blinking at a fast rate.
l If the unit has previously linked with your
Bluetooth-enabled device, you only need to
turn on the unit and select the Bluetooth mode,
no further operation is needed. The Pair indicator
will blink at a lower rate. .
l If you hold the PAIR button during the process
of pairing, the operation will be cancelled.
3. During this period, you can operate the mobile
phone, iPad or Bluetooth-enabled device to
pair with the unit within a 33 feet (10m)
range.
l Please check the user manual of the iPad or
Bluetooth-enabled device with which you
are initiating pair to learn about Bluetooth
connection with any other devices.
4. Once the unit is detected and its name
"Sound Platform" appears on the display of
your iPad or Bluetooth-enabled device, key
in the default password "1234" if a prompt
requests it.
l You may change the device name on your
Bluetooth-enabled device after the pair is
successfully set up.
l The pair indicator starts blinking quickly to
indicate that the unit and your device have
put into the connection mode.
l When a Bluetooth connection is established
successfully, the indicator starts blinking
slowly.
l If the Bluetooth connection is completed in
the Bluetooth display, and a prompt chime
will sound.
5. Select Bluetooth mode by repeatedly pressing
the SOURCE button on the unit or remote
control.
6. Select the desired music and press "Play"
button on your device. The unit automatically
starts playing the audio.
l Try again above steps 2 to 5 if the Pair
indicator on the unit lights solidly.
PAIR Button
Main Unit
Playing back via Bluetooth
For SFQ-01 Model ONLY
Downloading the SoundFreaq App
We have developed an App to give you full
control from your iPhone/iPad while playing
audio over the Bluetooth wireless connection,
please visit the iTunes App store and
download the "SoundFreaq Remote" App
for FREE.
After you build a Bluetooth connection between
your iPhone/iPad and the Sound Platform, a
prompt will be displayed on your iPhone/
iPad asking you if you would like to download
our App, click "Yes" to download.
You can click "No" to choose not to download
the App and still play music via the
Bluetooth connection but you will have
limited control, we suggest you download
the App.