Sound Kick SFQ-04
Safety Information 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
18. Do not place any naked flame sources, such as lighted candles, on the apparatus. 19. The battery used in this product must be properly recycled or disposed of. Please contact your local recycling center for proper battery handling and disposal instructions. Warnings: The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and users can obtain Canadian information on RF exposure and compliance from the Canadian Representative Burnport Holdings Ltd.
Information for Users on Disposal of Old Equipment CAUTION - Proper Installation Install the system in a place which is level, dry and neither too hot nor too cold. The appropriate temperature is between 5 oC and 35 oC. Install the system in a location with adequate ventilation to prevent internal heat from building up inside the unit. Leave sufficient distance between the system and TV. Keep the system away from TV to avoid interference with TV.
Contents Getting Started 5 Package Contents 5 Pulling out the Extension Chamber 5 Connecting the AC Adapter 6 Charging the Built-in Battery 7 Selecting the Sound Source 7 System Overview 8 Front View 8 Top View 8 Back View 8 Playing back via Bluetooth 9 Downloading the SoundFreaq App 9 Using Multiple Bluetooth Devices 10 Playing back from Macbook or Macbook Pro 10 Playing back from PC/Notebook 10 Playing back from External Source 11 Optimizing Sound Quality 12 Troubleshooti
Getting Started Package Contents Examine whether the following package contents are all included: Main Unit AC Adapter Pulling out the Extension Chamber Extension Chamber Before turn on the unit, you need pull out the extension chamber first. Use the finger notchs on the back panel to pull out the extension chamber. Note: If the extension chamber is closed, the unit will be powered off automatically. Finger Notch .5.
Connecting the AC Adapter WARNING! For optimal performance, use only the supplied AC adapter. Ensure that power supply outlet matches with the unit AC's input 100-240V~, 50/60Hz before connection. 1. Pull out the two blades of AC adapter. 2. Connect one end of the AC adapter to the DC IN jack of the unit and the other end to an electrical outlet. 1 9V 2 Electrical Outlet 2A .8. .6.
Charging the Built-in Battery The Sound Kick has a built in Lithium coin battery to give you portable power when not using the AC adapter. When the adapter is plugged in, the unit will charge. During charging, the charging indicator next to the DC IN jack will be solid red. When fully charged, it will be turn green. When operating the unit in battery mode, a flashing red indicator means the battery is low. You must charge this unit for 12 hours before using for the first time.
System Overview Front View 1. LED indicator 2. (Previous) / (next) button Skip to the previous or next track in Bluetooth mode. 3. (Play/Pause) button Press to play or pause a track. 4. PAIR button Put Sound Kick in pairing mode. 5. button Press to activate or deactivate the UQ3 (High Definition Wide Stereo) sound effect. 6. Vol +/- button Press to increase (+) or decrease (-) the volume level. 7. (on/Standby) button Switch between power-off and power-on modes. 8.
Playing back via Bluetooth Establishing a Bluetooth Connection Downloading the Soundfreaq App Soundfreaq Notes: If your mobile phone supports A2DP protocol, its music will play through the unit. You can make a Bluetooth connection with a mobile phone, an iPhone/iPad/iPod touch or any other Bluetooth-enabled devices.
The indicator on front panel starts blinking quickly to indicate that the unit and your device have entered into the connection mode. After a Bluetooth connection is established successfully, the indicator will be solid on. 4. Select the desired music and press "Play" button on your device. The unit automatically starts playing back the music. Ensure that the audio cable has been removed from the AUX jack of Sound Kick when enjoy music over the Bluetooth connection.
Playing back from External Source You can enjoy the sound from an optional component such as a portable digital music player through the speakers of this unit. Be sure to turn off the power of each component before making any connections. For details, refer to the instruction manual of the component to be connected. Connect an external device to the AUX IN jack on the back panel of the unit using a stereo audio cable (not supplied).
Optimizing Sound Quality TM "U-Cubed" is an proprietary technology designed to create an ultra wide stereo sound field in digital music systems. With exceptional natural sound reproduction of high definition and fidelity, we create a listening experience where you feel like your speakers are separated much more than they are. To activate UQ3 on: The unit, press the " " button to activate, press again to deactivate. On the Remote App, press the " " button to activate and deactivate.
Troubleshooting Check this list for a possible troubleshooting solution before calling for service. In These Cases Power does not come on. No sound output. The system is suddenly powered off. Check the Following Points • The built-in lithium battery is no power. Charge the battery. • Check if the volume level is set to the minimum. • Check if the volume level of your Bluetooth device connected to the system is set to the minimum. • Check if the volume level is muted.
Technical Specifications SFQ-04 Model Type Sound Kick Support Bluetooth Bluetooth 1.2, 2.0 and 2.1 compliant Support Profile A2DP Input Sensitivity/Impedance AUX Input Input Terminal External DC IN (for AC adapter), AUX IN Power Source DC 9 V AC Adapter 200 mV 2 A (External DC IN) Input: AC 100-240V, 50/60Hz Output: DC 9 V 2A Dimensions (Approx.) 267mm (W) * 106mm (H) * 42mm (D) Weight 704 g Design and specifications are subject to change without notice. .14.
13 Jan 2012 Consignes de sécurité ATTENTION NE PAS OUVRIR - RISQUE D'ÉLECTROCUTION Le symbole de l'éclair dans un triangle est destiné à mettre en garde l'utilisateur contre la présence de tensions dangereuses à l'intérieur du boîtier du produit, d'une puissance suffisante pour constituer un risque de choc électrique.