Wireless Speaker Alarm Clock Soundwith Rise SFQ-05
Safety Information 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
18. Do not place any naked flame sources, such as lighted candles, on the apparatus. 19. The battery used in this product must be properly recycled or disposed of. Please contact your local recycling center for proper battery handling and disposal instructions. FCC and IC Information: This device complies with Part 15 of the FCC Rules and RSS-210 of the IC Rules.
Information for Users on Disposal of Old Equipment CAUTION - Proper Installation Install the system in a place which is level, dry and neither too hot nor too cold. The appropriate temperature is between 5 oC and 35 oC. Install the system in a location with adequate ventilation to prevent internal heat from building up inside the unit. Leave sufficient distance between the system and TV. Keep the system away from TV to avoid interference with TV.
Contents Getting Started ............................................................................................................... 5 Package Contents .............................................................................................................................................................. 5 Connecting the AC Adapter ........................................................................................................................................... 5 System Overview ..........
Getting Started Package Contents Examine whether the following package contents are all included: Main Unit AC Adaptor FM Antenna Connecting the AC Adaptor Connect one end of the AC adaptor to the DC IN jack of the unit and the other end to a power outlet. WARNING! For optimal performance, use only the supplied AC adaptor. • Ensure that power supply outlet matches with the unit AC's input 100-240V~, 50/60Hz before connection. Power outlet .5.
System Overview 1. Display Window Front View 2. 1 Sound source button Tap repeatedly to select one of four sound sources or enter clock setting mode. 3. 5 2 6 3 4. / button Change the value for the clock, day of the week, and alarm setting. 7 4 Sound effect button Toggle among Bright, Warm and Flat modes. Adjust the volume level from 00 to 30. 5. Set button In clock and alarm setting mode, confime the setting. 8 In Bluetooth mode, place the System into pairing mode.
Display Window 13 12 11 10 9 8 7 1 2 3 4 5 6 1. Alarm indicator 9. Bell indicator Appears when the alarm is on. Disappears when the alarm is off. Appears when selecting the bell sound to wake up you. 2. Snooze indicator 10.Sound source indicator Blinks while snoozing, indicating that the alarm is paused. To indicate the currently selected sound source. 3. Sleep indicator 11.Multi-functional display to indicate the current time, alarm time, volume level, channel, frequency, etc.
Basic Operation Turning on/off the System 7. Tap the / to adjust the day of week. M-Monday, T-Tuesday, W-Wednesday, Th-Thursday, Fr-Friday, Sat-Saturday, Sun-Sunday. 8. Tap the SET button to confirm the setting. Press the “Power” button on the front of the System. Adjusting the Volume You can adjust the volume level from 0 to 30 When one of sound sources is selected by tapping the and buttons. POWER button and indicator During the process of adjusting, the will appear on the display.
Bluetooth Establishing a Bluetooth Connection Downloading the Soundfreaq App Soundfreaq Notes: • If your mobile phone supports A2DP protocol, its music will play through the unit. • You can make a Bluetooth connection with an iPhone/iPad/iPod touch or any other Bluetooth-enabled devices with iOS. We have developed an App to give you full control from your iPhone/ iPad/iPod touch while playing audio over the Bluetooth wireless connection, please download the "SoundFreaq Remote" App for FREE. 1.
• The indicator starts blinking quickly to indicate that the unit and your device have entered into the connection mode. • After a Bluetooth connection is established successfully, the indicator will be solid on. 6. Select the desired music and press "Play" button on your device. The unit automatically starts playing back the music. • Try again above steps 3 to 5 if the pair indicator starts blinking slowly after 3 minutes, the pair was unsuccessful.
iPod Note: In this user manual, “iPod” is used as a general reference to functions on an iPod, iPhone or iPad, unless otherwise specified by the text or illustrations.
Notes for Caring Your iPod: • The connector plug is protected with a cover when it is first purchased. Please remove the cover before operating the unit. • Do not carry the unit with iPod connected. You might drop it down or it might cause damages to the connector part. • Do not touch or hit the iPod terminal pins or the connector pins directly. It might cause damages to the connector part. • If the iPod does not play correctly, please update your iPod software to the latest version.
FM Press the Button Functions Unit • Switch between the frequency display and channel number display. Tune the desired frequency or channel number based on the different display. Frequency display Channel number display • Hold this button to enter saving mode. Press to save a channel. (see "Presetting a station”) • Select a channel (from 01 to 20). Change frequency from 87.5MHz to 108.0MHz in the FM mode.
Presetting a Station 1. Select FM tuner mode with the button. 4. Hold the SET button to start storing a station. • The channel number starts blinking. System Display 2. Switch to the frequency display if the display is channel number. 3. Tune a desired frequency. You can use either of the below methods to tune the frequency. System Display A. Manual Tuning - Briefly tap " "/ " " button repeatedly to move frequency to frequency (from 87.5 MHz to 108.0 MHz) until you find the desired station. 5.
Charging an External Device The USB power jack can be used to charge most devices that allow for USB charging (including many mobile phones, smart phones and wireless headsets). Note: Please use the USB power cord that came with your device to connect to Sound Rise to charge. 1. Tap the “Power” button to turn on the System. • The indicator on the button is solid on when the unit is powered on. USB power jack Using the Timer Setting the Sleep Timer Setting the Daily Timer 1.
2. Tap the SET button to enter to alarm setting mode. 3. Tap the or starting time. to adjust the hour of the • When you hold the button, the hour digit changes continuously. 4. Tap the SET button to confirm the setting. 5. Repeat 3 and 4 to adjust the minute of the starting time, the hour and minute of the finish time, and select the AM/PM, day of the week, sound source and the volume. 6. Press the “Power” button to turn off the System, if necessary. Cancelling the Daily Timer 1. Tap the / button.
Troubleshooting Check this list for a possible troubleshooting solution before calling for service. In These Cases Check the following points Power does not come on. • AC adaptor is not inserted securely. Plug in securely. Cannot operate iPad/iPhone/iPod. • Is the connector plug of the unit firmly inserted into the connector port of the iPad/iPhone/iPod? • Is the iPad/iPhone/iPod properly functioning? Test the iPad/iPhone/iPod functions in stand-alone condition. iPad/iPhone/iPod cannot be charged.
Technical Specifications SFQ-05 Model Type Sound Rise Support Bluetooth Bluetooth 1.2, 2.0 and 2.1 compliant Support Profile A2DP Input Sensitivity AUX Input ? mV Band Tuner FM Tuning Range 87.5 ~ 108.0 MHz Frequency Step 100 KHz Preset Stations 20 Input Terminal External DC IN (for AC adaptor), AUX IN Power Source DC 12 V AC Adaptor 2.5 A (External DC IN) Input: AC 100-240V, 50/60Hz Output: DC 12 V 2.5 A Dimensions (Approx.) 148 mm (W) * 220 mm (H) * 143mm (D) Weight 1.48Kg .
Save this manual