User's Manual

.9.
Establishing a Bluetooth Connection
Notes:
• If your mobile phone supports A2DP
protocol, its music will play through the unit.
• You can make a Bluetooth connection with
an iPhone/iPad/iPod touch or any other
Bluetooth-enabled devices with iOS.
1. Press the “Power” button to turn on the
System.
• The indicator on the button is solid on when
the unit is powered on.
2. Tap the button repeatedly to select the
Bluetooth mode.
• The indicator appears on the display and
blinks slowly.
3. Tap the SET button on top of unit to put
Sound Rise in pairing mode.
• The indicator starts blinking at a fast rate.
• If you hold the SET button for more than
3 seconds during the process of pairing,
the operation will be cancelled.
4. During this period, you can operate the
mobile phone, iPad or Bluetooth-enabled
device to pair with the unit within a 33 feet
(10m) range.
• Please check the user manual of the iPad or
Bluetooth-enabled device with which you
are initiating pair to learn about Bluetooth
connection with any other devices.
5. Once the unit is detected and its name
"Sound Rise" appears on the display of your
Bluetooth-enabled device, key in the default
password "1234" if a prompt requests it.
Bluetooth
Downloading the Soundfreaq App
We have developed an App to give
you full control from your iPhone/
iPad/iPod touch while playing audio
over the Bluetooth wireless
connection, please download the
"SoundFreaq Remote" App for FREE.
After paring an iOS device with Sound Rise, you
can download the free Soundfreaq Remote App
in the Apple website and on our website:
www.soundfreaq.com
When the App installation is finished, you can
control the playback from your iOS device. The
app can be used as a remote control.
Warning!
Do not unplug the AC adaptor from the System
when playing back a track over the Bluetooth
connection.
Soundfreaq
POWER button and indicator
SET buttonSource button