Warranty

Page | 6
Assembly for 3ft and 4ft Width Houstonian Awnings
For video assistance on assembly please go to our youtube link: https://youtu.be/G44LiwmYEGY
Step 1:Count every part to make sure you have the proper amount for your specific
awning width size (ft).
Step 2: Frame Assembly for 3ft & 4ft Houstonians:
Parts you will need: 4-(a) Black Nylon “L” Connectors, 1-(b) Full Top Bar, 1-(c) Front Bar (with
hooks), 1-(d1) Left Frame, 1-(d2) Right Frame, and 1 Rubber Mallet/Hammer
a) Lay out the frame parts to where the (d1) Left Frame and (d2)Right Frame are parallel and the
(b) Full Top Bar is parallel to the (c) Front Bar (with hooks). Refer to the figure A1.
b) Make sure the curves of the hooks on the (c) Front Bar are facing downwards. Make sure the
extenders of the (b) Full Top Bar are facing downwards. Refer to the figure A2.
c) Connect the (a) Black Nylon “L” Connectors with a rubber mallet/hammer to each frame part.
Figure A1: Frame Layout
Figure A2: (b) Full Top Bar with Extenders Facing Downwards
(Full Top Bar)
(Front Bar with Hook Extenders)