Warranty

Page | 13
a) Drill the pilot holes into the desired surface. Put the (o) anchors into the wall and make sure
they are snug.
b) Mount the tabs of the (j1) Left Back Bar and the (j2) Right Back Bar onto each (o) anchor. Make
sure the anchor is in between the back bar mounting opening.
c) The awning should fit under the (n) Shroud (Hood Cover)
d) Place each (m) Nut on the tip of each (o) anchor and tighten accordingly. Please refer to Figures
H1.
Figure H1:Mounting the Awning onto the wall