Warranty

Page | 3
Hardware for Different Surface Applications
Before you begin the assembly, there is a variety of building wall surfaces; Awntech does not supply the
hardware to install your awning. You will need to purchase installation hardware at your local hardware
store. We have advised you on different surface applications below:
Concrete Block Walls
 (1)1/2” masonry bit with a 3/8” shank
 (4-5) 5/16”X3” Masonry anchor bolts
 9/16” socket
Metal Buildings
 2X6X8 #2YP Cut into 12” blocks for the back side
of the metal
 (4-5) 5/16”x4” lag bolts
 (4-5) 5/16” washer and 3/8” drill bit
 Bolt through the washer, the bracket and the metal
into wood blocks behind the metal.
Any Type of Siding
 (4-5) ¼”x4” toggle bolts
 (4-5) ¼” washers
 Flat head screwdriver
 ½” drill bit (or if you hit a stud)
 (5-8) 5/16”X4” lag bolts
 (4-5) 5/16” washers
 (1) 3/16” drill bit and a 9/16” socket
Concrete, Brick, or
Stone
 ½” Masonry bit with a 3/8” shank
 (4-5) 5/16”x3” masonry anchor bolts
 (4) 5/16”X4” bushings
 9/16” sockets
 You will also need a roll of weather stripping.
Stucco
 (4-5) ¼”X4” toggle bolts
 (4-5) ¼” washers
 flat head screwdriver
 ½” drill bit (or if you hit a stud)
 (4) 5/16”X4” lag bolts
 (4-5) 5/16” washers
 3/16” drill bit
 9/16” socket