Warranty

Page | 7

c) Connect the (b1) Right Top Bar and (b2) Left Top Bar together by inserting one of the (p)

Aluminum Inserts in with a Rubber Mallet/hammer. Hammer the (p) Aluminum insert in the flat

hollow opening of the (b1) Right Top Bar up until the black line marker in the middle of the (p)

Aluminum Insert reaches the edge of the hollow opening of the (b1) Right Top Bar. Connect the

flat hollow opening of the (b2) Left Top Bar to the other half of the same (p) Aluminum Insert.

Refer to the figure A3.

Figure A3: Connecting the Right and Left Top Bar

d) Connect the (d1) Left Front Bar and (d2) Right Front Bar together by inserting one of the (p)

Aluminum Inserts in with a Rubber Mallet/hammer. Hammer the (p) Aluminum insert in the flat

hollow opening of the (d1) Left Front Bar up until the black line marker in the middle of the (p)

Aluminum Insert reaches the edge of the hollow opening of the (d1) Left Front Bar. Connect the

flat hollow opening of the (d2) Right Front Bar to the other half of the same (p) Aluminum Insert.

Refer to the figure A4.