Warranty

OHIO (BAHAMA) METAL SHUTTER METAL AWNING
OWNER’S MANUAL & INSTALLATION INSTRUCTIONS
WARNING: Adult Assembly Required
WARNING: Assembly Kit Contains Parts With Sharp Points, Sharp Edges, and Small Parts That Can Present Choking Hazards to Children.
WARNING: Components Are Packed In Plastic Bags That are a Suffocation Hazard.
NOTE: Please inspect the parts for damage during shipping and/or for any missing items. If you suspect that there may be damage or a shortage, contact us and we
will send replacement parts if needed. At this time, visualize how the components fit together and make sure that you have identified the various parts.
There are a variety of building wall surfaces, Awntech does not supply the hardware to install your awning. You will need
to purchase installation hardware at your local hardware store. We have advised you on different surface applications
below:
CONCRETE BLOCK WALLS: (1)1/2” masonry bit with a 3/8” shank, (4-5) 5/16”X3” Masonry anchor bolts, 9/16” socket.
METAL BUILDINGS: (1) 2X6X8 #2YP (treated lumber) cut into 12” blocks for the back side of the metal, (4-5)
5/16”x4” lag bolts, (4-5) 5/16” washer and 3/8” drill bit. Bolt through the washer, the bracket and the metal into
wood blocks behind the metal.
ANY TYPE OF SIDING: (4-5) ¼”x4” toggle bolts, (4-5) ¼” washers, (1) Flat head screwdriver, (1) ½” drill bit (or if you hit a
stud) ; (5-8) 5/16”X4” lag bolts, (4-5) 5/16” washers, (1) 3/16” drill bit and a 9/16” socket.
CONCRETE, BRICK OR STONE: (1) ½” Masonry bit with a 3/8” shank, (4-5) 5/16”x3” masonry anchor bolts, (4) 5/16”X4”
bushings, 9/16” sockets. You will also need a roll of weather stripping.
Stucco: (4-5) ¼”X4” toggle bolts, (4-5) ¼” washers, (1) flat head screwdriver, (1) ½” drill bit (or if you hit a stud): (4)
5/16”X4” lag bolts, (4-5) 5/16” washers, (1) 3/16” drill bit and a 9/16” socket.
PARTS

Summary of content (5 pages)