Use and Care Manual

ManualsBrandsBeautyrest Recharge World Class ManualsKitchenJean Plush Full-Size Mattress Set

This exclusive Simmons

product is built with a single-sided design. This bed does

not have to be ﬂipped to maintain warranty. The single-sided design mattress

will have a different type of ﬁnish on the bottom than the top. To register your

Simmons

mattress, please visit www.beautyrest.com/register

DO:

•Use a new Simmons

foundation or a supportive,

rigid, non-yielding foundation. An old foundation

unit may not provide sufﬁcient support.

•Support your Simmons

mattress and foundation

only with a frame that provides rigid center support

as well as support for the head, foot, and sides for

queen, split queen, king and California king size sets

(as noted above). For any queen or king frame that

does not have a metal center support, you must use

at least 5 hardwood (i.e., oak or ash) slats (1” x 4”)

and add legs to the 3 center slats. By not providing

a sufﬁcient supportive frame, damage can occur to

the product and your warranty will be invalid.*

•Add a solid platform on top of any open slatted

mattress support system with openings between

the slats that exceed two (2) inches (e.g., a platform

bed frame in which a Beautyrest

or BeautySleep

mattress rests directly upon slats with open spaces

between the slats). Use of such an open slatted

mattress support system with spaces between the

slats which exceed two (2) inches (5 centimeters),

without the addition of a solid platform will damage

your mattress and your warranty will be invalid.

•Use a quilted protector pad on your mattress at

all times to avoid stains (including MoistureBan

™

products).

•Carton your mattress and carry it on its side when

moving.

•If your mattress has a removable cover, use only a

professional dry cleaning service to clean the cover.

•If your Simmons

mattress was manufactured on or

after July 1, 2007, it meets the requirements of the

Federal Flammability Standard, 16 CFR 1633, when

your mattress is used alone or with the Simmons

foundation(s) as speciﬁed on the 1633 law label (see

example of 1633 law label on next panel).

DO NOT:

•Do not use an open slatted mattress support

system (e.g., a platform bed frame in which your

mattress rests directly upon slats with open spaces

between the slats) where the openings between the

slats are greater than two (2) inches (5 centimeters)

as this will damage a Beautyrest

or BeautySleep

mattress. To prevent damage to your mattress if

the openings between the slats exceed two (2)

inches (5 centimeters), the support system may be

modiﬁed by applying a solid platform on top of the

slat system.

•Do not remove the white law label or the model

name label. These labels serve as a means of

identiﬁcation to establish your warranty rights.

•Do not bend or fold, stand or jump on product as

damage can occur.

•Do not use cleaning ﬂuids on your mattress; it may

damage some of the materials.

•Do not use any type of fabric protection spray or

chemical application on this product.

•If your mattress has a removable cover, do not

machine wash the removable cover.

•If your mattress has a removable cover, do not

remove or wash the inner mattress cover or bottom

fabric of removable outer cover.

•If your mattress has a removable cover, do not wash

the foam mattress core.

•If you purchased a Simmons

product, including

ComforPedic,

that contains one (1) inch or more

of AirCool

or NxG

Memory Foam, do not use a

heating pad or electric blanket.

•Do not smoke in bed or use open ﬂames near the

bed.

* For all adjustable foundations, please see the owner’s

assembly and operating manual for required support.

MATTRESS CARE

LIMITED WARRANTY LIMITED WARRANTY

HOW CAN I GET SERVICE ON MY WARRANTY?

Contact your original Simmons

dealer. If your

original Simmons dealer is no longer in business or

you have moved outside the service area, please

contact the Simmons Consumer Service Facility

at customerassistance@simmons.com. A copy of

original bill of sale is needed to determine original

date of purchase. Model name label and law label

must be provided to identify the bedding and

validate this warranty.

WHAT IS COVERED?

If you purchased a Simmons

mattress and use it with

a foundation and frame that provide proper support,

this warranty covers manufacturing defects in your

Simmons

mattress or foundation. This warranty also

covers faults in materials or manufacturing defects in

the removable fabric cover available on select models.

Replacement of one piece does not automatically

result in the replacement of any other piece. This

limited warranty is provided only to the original

purchaser.

Examples of proper support for queen, split queen, king

and California king size bedding when the mattress is also

supported by a conventional foundation or box spring.

HOW LONG IS THE COVERAGE PERIOD?

The warranty coverage runs from the original date of

purchase. Repair or replacement of the mattress or

foundation does not extend its limited warranty or

begin a new limited warranty period. Your warranty

period is based on the code indicated on your white

law label. (See chart)

WHAT WILL SIMMONS DO?

If your Simmons

mattress, foundation or removable

fabric cover (available on select models) fails due to

a manufacturing defect, the exclusive remedy under

this warranty will be repair

or replacement of the

defective product in the

U.S., Puerto Rico or U.S.

Virgin Islands. Simmons

reserves the right to

substitute comparable

materials or models and

does not guarantee that

the replacement will

match the existing piece.

YOUR RIGHTS UNDER

STATE LAW:

This warranty gives you

speciﬁc rights, and you

may have other rights,

which vary from state

to state. This warranty

is extended only to

the original purchaser

from Simmons Bedding

Company or its

authorized dealers.

WHAT IS EXCLUDED UNDER

THIS WARRANTY?

This warranty does not apply to and excludes:

•Firmness preference of the product

•Normal body impression(s) as indicated by your

warranty code (see chart)*

•Bed height/weight

•Cover (fabric)

•Bent border/grid wires

•Burns, stains or soil

•Mattresses not used with a proper foundation and

support system. Examples of proper support include:

■

Simmons

foundation or a supportive,

rigid non-yielding foundation. The frame

supporting queen and king size mattresses

and foundations must have sufﬁcient center

support

■

Slatted platform bed frames where the space

between the slats measures two (2) inches (5 cm) or

less and which, with a queen or larger size, provide

adequate center support

■

The appropriate Simmons

adjustable

foundation

•Damage due to use of a Beautyrest

or BeautySleep

mattress on a slatted platform bed frame without a

solid foundation where the space between the slats

exceeds two (2) inches (5 cm)

•Adjustable foundations (see owner’s manual for

details on warranty coverage)

•For models with removable covers, damage

due to improper washing (including snags and

discoloration)

•Merchandise sold “as-is”, “distressed” or “ﬂoor

model/sample”

•Claims made outside the 50 United States, Puerto

Rico or U.S. Virgin Islands

•Transportation, inspection, or removal costs of

product

•Simmons

product that is stained, soiled, or infested

with vermin, even if defective

* Please note that due to use of higher density foams and/

or the use of memory foam technology in some models,

the recovery time may take up to 4 hours. However, normal

increase in softness or a decrease in the recovery feature due

to normal use, temperature, or humidity is excluded under

this warranty.

THE DURATION OF ANY APPLICABLE IMPLIED

WARRANTIES, INCLUDING BUT

NOT LIMITED TO

THE IMPLIED WARRANTIES

OF MERCHANTABILITY

AND FITNESS, SHALL NOT EXCEED THE TERM

OF THIS LIMITED WARRANTY.** SIMMONS

SHALL NOT BE LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES THAT RESULT FROM

THE USE OF YOUR SIMMONS

PRODUCT.***

NO EXPRESSED OR IMPLIED WARRANTIES

ARE EXTENDED TO PERSONS WHO PURCHASE

THE PRODUCT FROM

ANYONE OTHER THAN

SIMMONS BEDDING

COMPANY OR ITS

AUTHORIZED DEALERS,

AND ALL WARRANTIES

TO SUCH PERSONS, INCLUDING THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND

FITNESS, ARE HEREBY EXCLUDED.

** Some states do not allow limitations on how long an implied

warranty lasts, so the above limitations may not apply to

you.

*** Some states do not allow the exclusion or limitation

of incidental or consequential damages, so the above

limitations and exclusions may not apply to you.

For warranty assistance or other product

correspondence, please contact your

Authorized Dealer, or:

One Concourse Parkway, Suite 800

Atlanta, GA 30328

toll-free (877) 399-9397 fax (770) 613-8575

www.simmons.com

customerassistance@simmons.com

Part#805.72014•Revised09/12

Warranty Code

on Law Label

Total Limited

Warranty

Period for No Charge

Except Transportation

Normal Body

Impression

A 10 Year 10 Year 1.5” or less

B 1 Year 1 Year 1.5” or less

C Speciﬁc warranty applies, see separate agreement

E 20 Year 10 Year .75” or less

G 2 Year 2 Year removable fabric cover

H 5 Year 5 Year 1.5” or less

I 20 Year 10 Year 1.5” or less

J 3 Year 3 Year 1.5” or less

K 10 Year 3 Year 1.5” or less

L 25 Year 10 Year .75” or less

M 15 Year 10 Year 1.5” or less

N 25 Year 15 Year 1.5 ” or less

O 25 Year 15 Year .75” or less

NOTE: See the example of law label for warranty coding.

*Transportation charges are the responsibility of the consumer, except in CA.

EXAMPLE LAW LABEL

If you inadvertently remove

white law tag from product,

please attach here to save.

NOTE:

The warranty Code

is located here on

your Law Tag.

EXAMPLE 1633 LABEL

THE FOLLOWING CARE INSTRUCTIONS

CAN HELP PRESERVE WARRANTY RIGHTS:

Acceptable Support Superior Support Premium Support*

All Queen Sizes All Sizes All Sizes

Metal Frame

5 Legs 6 Legs 7 Legs

Wood Frame

5 Hardwood Slats

3 Center Legs

N/A 5 Hardwood Slats

3 Center Legs

*Recommended

PRODUCT WARRANTY

& CARE INSTRUCTIONS

Simmons Bedding Company would like to thank you for your recent

purchase of a Simmons sleep system. With your selection you join millions

of people around the world who have decided a superior mattress can

make the difference in the quality of sleep they enjoy.

The bed you will sleep on tonight draws on more than 140 years of

manufacturing innovation, enhanced by sleep research pioneered by

Simmons in 1925. Simmons is committed to scientiﬁc design and testing

of its products, helping you to sleep soundly for years to come. If you

have questions, please visit our website at www.beautyrest.com.

To register your Beautyrest

mattress,

please visit www.beautyrest.com/register

Para registrar su colchón Beautyrest,

visite www.beautyrest.com/register

GARANTÍA E INSTRUCCIONES PARA

EL MANTENIMIENTO DEL PRODUCTO

Simmons Bedding Company desea agradecerle por su reciente compra

de un sistema de cama Simmons. Al elegir este producto se une a

millones de personas en todo el mundo que han decidido que un colchón

de superior calidad puede hacer la diferencia en su calidad de sueño.

La cama en la que dormirá esta noche cuenta con más de 140 años de

innovadora fabricación, optimizada gracias a la pionera investigación del

sueño realizada por Simmons en 1925. Simmons tiene un compromiso

con el diseño cientíﬁco y con la evaluación de sus productos, ayudándole

así a disfrutar de un profundo sueño durante años y años. Si tiene alguna

pregunta, visite nuestro sitio web en www.beautyrest.com.

Summary of content (2 pages)

PAGE 1
PRODUCT WARRANTY & CARE INSTRUCTIONS To register your Beautyrest® mattress, please visit www.beautyrest.com/register MATTRESS CARE This exclusive Simmons ® product is built with a single-sided design. This bed does not have to be flipped to maintain warranty. The single-sided design mattress will have a different type of finish on the bottom than the top. To register your Simmons ® mattress, please visit www.beautyrest.
PAGE 2
Mantenimiento Del Colchón La fabricación de este exclusivo producto de Simmons® incorpora un diseño de lado único. No es necesario darle vuelta al colchón para conservar la protección de la garantía. El lado superior de su colchón con diseño de lado único tiene un tapizado diferente al de la parte inferior. Para registrar su colchón Simmons,® visite www.beautyrest.