dmc3-4/dmc1CD Owner’s Manual # QEG ".
dmc3-4 Safety First READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR USING THE dmc3-4 SYSTEM THE dmc3-4 MUST BE INSTALLED BY AN M&S SYSTEMS DEALER OR INSTALLER, AND MUST CONFORM TO ALL LOCAL BUILDING AND ELECTRICAL CODES. Warning: Always follow these safety instructions. Retain these instructions for future system reference. DO NOT expose the dmc3-4 to moisture. Doing so can create fire or shock hazards and void the warranty.
dmc3-4 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. USE ONLY M&S Systems replacement parts and have them installed by an M&S Systems dealer or installer. Unauthorized substitutions can result in fire, electric shock, or other hazards.
dmc3-4 Table of Contents Safety First ................................................................................................................i Table of Contents...................................................................................................iii Introduction .............................................................................................................1 System Overview ...................................................................................................
dmc3-4 Table of Figures Figure 1—System Settings.................................................................................................................2 Figure 2—Clock Settings: Set Time................................................................................................3 Figure 3—Preset Radio Stations......................................................................................................5 Figure 4—Scan Progressions..........................................................
dmc3-4 Introduction The dmc3-4 is an intercom and sound system designed for today’s home. Its compact size and modern, elegant look complement any décor. The dmc3-4 offers more than just sensible good looks. It gives you peace of mind as it allows you to communicate with family members and monitor specified rooms. The dmc3-4 offers high quality sound throughout your home from several sources, including the radio, CD player or other connected audio sources in your home.
dmc3-4 Room/Patio Station The Room/Patio Stations provide intercom functions and system music control capabilities. Depending on the room configuration at the Master Station, a Room/Patio Station can communicate with or monitor other stations and communicate with the Door Stations. The system’s music can be turned on and off, music volume adjusted, and music sources changed from the dmc3RS and dmc4RS room stations.
dmc3-4 Clock Settings You can set two clock functions: • • Normal—Displays the normal time of day. Music Auto On/Off—Sets the times to automatically turn the last music source on and then off. AUTO AUTO Set normal time and music Auto On/Off times TIME TIME l2:20 :20P PRESET PRESET POWER POWER SET TIME TONE TONE SOURCE SOURCE ∧ ∧∧ TUNE TUNE ∨ LISTEN LISTEN TALK TALK DOOR DOORTALK TALK ∧ VOLUME VOLUME Change hours and minutes ∨ Figure 2—Clock Settings: Set Time To change clock settings: 1.
dmc3-4 4. Press TIME to continue through the settings: Music Auto On, hour and minutes and Music Auto Off, hour and minutes. 5. After you have entered Music Auto Off minutes, press TIME to return to Normal Time display. Note: You can enable or disable the AUTO function. The word “Auto” will appear on the display when Auto Function is on. See Music Settings/Auto On/Off.
dmc3-4 Tune the Radio To tune a radio station: 1. Press POWER to turn on the music. 2. Select FM or AM. See Music Settings/Music Source for instructions. 3. Use TUNE UP or TUNE DOWN to find a station. If you press and release, within 1 second, TUNE UP or TUNE DOWN, the tuner goes into Seek Mode and finds the next station with a strong signal. If you press and hold TUNE UP or TUNE DOWN, the tuner goes into Scan Mode and scans all frequencies until you release the button.
dmc3-4 5. If you don’t want to assign a preset number, wait 5 seconds and your selected radio station will automatically be assigned to the preset number that is displayed. If you want to select the preset number, press the PRESET button repeatedly to cycle through numbers1-8 until you reach the preset number you want. 6. Wait 5 seconds. The display updates to show the new station for the selected preset number.
dmc3-4 To set the Scan Mode: 1. To change the scan mode, simultaneously press and release PRESET and SOURCE again. The display shows either Scan1 or Scan2. Note: Exit out of scan mode by pressing PRESET and SOURCE or waiting for the display to show the clock time again. AUTO SCAn1 TIME PRESET POWER TONE SOURCE ∧∧ TUNE TUNE ∨ PRESET + SOURCE Change Scan mode.
dmc3-4 To change volume and tone settings: 1. Press POWER to turn on music. The system defaults to music volume. Use VOLUME UP and VOLUME DOWN to adjust the music volume from 0-29. All other audio settings return to music volume after 5 seconds. 2. Press TONE. Master Volume appears. This controls the volume for the Master Station speaker only. Use VOLUME UP and VOLUME DOWN to adjust the Master Volume from 0-29. Note: When music is off, use VOLUME UP and VOLUME DOWN to adjust Master Volume. 3. Press TONE.
dmc3-4 Turn music on AUTO POWER 12:20P TONE TIME Select setting to change ON LOUDNESS PRESET SOURCE ∧∧ TUNE TUNE ∨ ∧ LISTEN TALK DOOR TALK Change setting VOLUME ∨ Figure 7—Tone Settings: Loudness Display Brightness DOOR DOORTALK TALK 1. Simultaneously press TUNE UP and POWER. The display cycles through brightness levels: low, medium, and high, then repeats the cycle. 2. Press the buttons repeatedly until you reach the brightness you prefer.
dmc3-4 Selector switch for Master Station M 1 2 3 Selector switches for Room Stations INTERCOM RADIO/INT Key to Intercom selector switch settings OFF MONITOR 4 5 6 7 m&s 8 Selector switch for Patio Station 9 P Figure 8—Intercom Settings Intercom When a station is set to Intercom (Intercom only): • • • • • You can talk and listen from this station. The room does not receive music. The room cannot be monitored. The room cannot hear other rooms that are set to Monitor.
dmc3-4 • • The station itself cannot be monitored. Note: When a station is set to Radio/INT, the sound and activity in that room can be heard by another room station by pressing the LISTEN button. • The station hears the door chime and communicate with and listen to a door Station. Off When a station is set to OFF: • • • • • You can communicate from a Room Station but you cannot communicate from a Patio Station. Other Room Stations cannot listen to the room.
dmc3-4 Door Talk/Listen • • • Press TALK and LISTEN simultaneously to enter Door Talk mode. This allows you to talk to the Door Stations. All other stations set to Intercom or Radio/INT can hear the conversation. Release the TALK and LISTEN buttons to listen to the Door Station. The Listen mode is active for a total of 25 seconds after you release the TALK and LISTEN buttons. You may talk again at any time by pressing TALK and LISTEN.
dmc3-4 Room/Patio Station Operation 4-Wire (M&S Systems Retrofit) VOLUME UP + VOLUME DOWN Scan music sources. Hold for 4+ seconds to activate Security/Home Automation function. (Not available on Patio Station.) TALK + LISTEN Talk and listen to Door Station Listen to all stations set to Intercom or Radio/INT. DOORTALK LISTEN TALK SCAN OFF - MUSIC VOLUME + Talk to all stations set to Intercom or Radio/INT. Press and hold to turn off System Music. Press to adjust System Music volume.
dmc3-4 Select Music Source The system music source can be selected from any Room/Patio Station. The music sources that are available vary depending on the Scan setting on the Master Station. (See Master Station Settings/Music Settings/Scan Mode for details.) Note: You cannot select specific tracks on the CD from a Room/Patio Station. To scan for a music source: 1. Simultaneously press and release VOLUME UP and VOLUME DOWN to switch music sources.
dmc3-4 Note: If you press and hold these buttons for 4 seconds or more, you initiate the Security/Home Automation function. (See Intercom Operation/Security/Home Automation for details.) This function is not available on the Patio Station. Talk/Listen to the door TALK DOOR VOLUME UP + VOLUME DOWN Scan music sources. Hold for 4+ seconds to activate Security/Home Automation function. (Not available on Patio Station.) SCAN ROOM OFF ON - MUSIC VOLUME + Press and hold to turn off System Music.
dmc3-4 CD Player Operation (Optional) 1. Load up to 6 CDs in the CD changer. 2. Press POWER to turn on music. 3. Select CD as the music source. See Master Station Settings/Music Settings/Music Source for instructions. When CD is selected as the music source, the display shows the following information: • • Which CD is playing, indicated by a circle around the CD number The track that is playing, indicated by the number on the display Note: Initially, the display shows six CD positions.
dmc3-4 RF Remote Control (Optional) Up to 4 different remotes can be programmed to control the Master Station. The system obtains a unique code from the remote, virtually insuring that no one else can interfere with your system and you will not interfere with anyone else. To program the RF remote: 1. Simultaneously press and release AUTO and SOURCE. RF and SET appear on the display. 2. Press and hold any button on the remote until the RF and SET disappear from the display. The remote is now ready to use.
dmc3-4 M&S Systems 2-Year Warranty M&S Systems warrants its products to be free of defects for 2 years. Except for the AirVac Gold power units. The warranty period begins on either (a) the date of purchase or installation date of this product or (b) the date of closing on a new residence in which this product was originally installed. The warranty extends to the original user of the product and to each subsequent owner of the product during the term of the warranty.
dmc3-4 115992-2 B www.mssystems.com | 800.421.1587 | # QEG 19 ".
