BEC 6300VNL GigaConnect® 4G/LTE VoIP Wireless Broadband Router Quick Start Guide Version 1.
BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router PLEASE READ THE QUICK START GUIDE AND FOLLOW THE STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE. IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE USER MANUAL ON CD-ROM.
Quick Start Guide Front Panel LEDs LED Power Battery EWAN Ethernet Port LAN 1 ~ 3 USB Wireless/WPS Phone LTE (Received Signal Strength Indicator) Internet STATUS DESCRIPTION Green System is up and ready Red Boot failure Green UPS is functional properly Orange UPS battery failure. Orange blinking UPS AC power failure and battery functional properly Off Device powered by the DC power adaptor Lit up BEC 6300VNL is successfully connected with a broadband connection device.
BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router Rear Panel Connectors 1 3 4 5 6 2 7 8 9 PORT 11 10 MEANING LTE Antenna Screw the supplied LTE antennas onto the antenna connectors on both sides. SIM Card Slot Insert the mini SIM card (2FF) with the gold contact facing down. Push the mini SIM card (2FF) inwards to eject it Phone (1X-2X) Connect your analog phone to this port with a RJ-11 cable. 4 USB The USB can either setup for 3G/4G LTE internet access or storage/file sharing.
Quick Start Guide Hardware Connection Hardware Installation 1. Power Connection Select power source from using a (1) DC power adapter or (2) UPS (Uninterruptible Power Supply) 1.1 Using the Supplied DC Power Adaptor Plug in the supplied power adapter to the wall jack, the other side to the 6300VNL then power ON the 6300VNL by pressing the Power On/Off button.
BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router 1.2 Using a UPS Battery Unit Power OFF the power source button and plug the uninterruptible power supply (UPS) to the device; it’s an electrical apparatus that can provide emergency power when the main power source fails. 2. LAN Connection Connect the supplied RJ-45 Ethernet cable to one of the Ethernet ports, and the other side to the PC’s Ethernet interface. 3.
Quick Start Guide 3.2 EWAN Connection Connect RJ-45 Ethernet cable to the EWAN port, and connect the other side to another alternative broadband device, such as Cable Modem, VDSL, Fiber Modem or PON optic lines. 3.3 USB 3G/4G_LTE Connection Connect a USB 3G/4G LTE dongle or modem with an activate data plan to the USB port. 4. USB for Network File Sharing BEC 6300VNL has built-in FTP and Samba Servers, Simply plug in an external USB HD then follow the instruction setup in the User Guide.
BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router 6. Phone Connection Connect RJ-11 cable to the router’s “Phone 1” or “Phone 2” when connecting to an analog phone set. Both ports (“Phone 1” and “Phone 2”) can make VoIP calls simultaneously. But only one phone is allowed to make PSTN call at the same time.
Quick Start Guide Connecting to the Router The default IP of modem is 192.168.1.254 with subnet 255.255.255.0. Make sure the attached PC to this router is in the same subnet and has an IP address in the range between 192.168.1.1 ~ 192.168.1.253. Open a web browser and type http://192.168.1.254 in the URL address bar. URL Address bar: type http://192.168.1.254 The login prompt will appear. Input the default username (admin) and password (admin) for Account type, Administrator.
BEC 6300VNL 4G/LTE VoIP Wireless Broadband Router Step 3: Setup Wireless Connection Access Point: select Activated SSID: Assign an unique name Channel: pick from 1~11 Security Type: select a mode - Disable (No security) - WPA - WPA2 (Most secure one) - WPA / WPA2 (auto detect WPA mode with wireless clients) - WEP (Less secure one) Pre-Shared Key: key for wireless authentication - WPA / WAPA2 Share Key: Assign a key between 8 ~ 63 characters.
Quick Start Guide Troubleshooting 1. None of the LEDs are on when you turn on the router. Check the connection between the adapter and the router. If the error persists, you may have a hardware problem. In this case you should contact technical support. 2. You have forgotten your router login and/or password. Try the default login and password, please refer to User Manual.
