User's Manual

Device Configuration
Advanced Setup – Mail Alert
71
BEC 6900 R21 / RidgeWave 6900 User Manual
Mail Alert
Mail alert is designed to keep system administrator or other relevant personnel alerted of any
unexpected events that might have occurred to the network computers or server for monitoring
efficiency. With this alert system, appropriate solutions may be tackled to fix problems that may have
arisen so that the server can be properly maintained.
Server Information
SMTP Server: Enter the SMTP server that you would like to use for sending emails.
Username: Enter the username of your email account to be used by the SMTP server.
Password: Enter the password of your email account.
Sender’s Email: Enter your email address.
SSL/TLS: Check to whether to enable SSL encryption feature.
Port: the port, default is 25.
Account Test: Click the button to test the connectivity and feasibility to your sender’s e-mail.
WAN IP Change Alert
Recipient’s Email (WAN IP Change Alert): Enter a valid e-mail address to receive an alert
message when WAN IP change has been detected.
Recipient’s Email (4G/LTE Usage Allowance): Enter a valid e-mail address to receive an alert
message when the 4G/LTE over Usage Allowance occurs.
Click Apply button to save settings.