User manual

86
>>> NAVIGATION MODE
The Time button
You can select the time zone relevant for
your location in the
Time settings
window. This setting is important for the
correct calculation of the estimated time
of arrival.
> Press
Time in the settings menu.
The
Time settings window appears.
Using the
Time zone you can set whether
the time zone should be set automati-
cally by the Navigation device or not (
Use
auto time zone
on or Use auto time
zone
off ).
If the automatic function is switched off,
you can select the desired time zone by
pressing the button below
Use auto time
zone
.
The Reset button
You can reset the navigation settings to
their factory settings.
The settings will then be reset. The fast
access mode data, stored routes,
blocked routes, voice and home address
are retained.
> Press the
Reset button.
> Press the
Yes button.
The navigation settings are reset to their
factory settings.
Traffic announcements using
TMC (depending on the model)
Your Navigation device can receive
traffic announcements (TMC messages)
from radio stations. The power supply
with the integrated TMC antenna must
be connected to the carrier plate for this
function.
Traffic announcements are transmitted
by radio stations via the TMC (Traffic
Message Channel) in addition to the
radio programme and are received and
analysed by the navigation system.
Receiving traffic announcements is free
of charge.
Note:
TMC is not available in all countries.