OPERATING GUIDE
Contents >>> CONTENTS Contents 24-month warranty Warranty Safety instructions The Navigation device Operating manual contents Use of the product Navigation 2 6 6 7 9 9 9 9 Images* Telephone (selected models) 9 10 Unpacking the Navigation device 10 11 14 14 Description of the device 14 The basic unit Cable for power supply from cigarette lighter Battery USB connection cable Unit bracket Accessories Mains power supply unit Overview of the scope of Delivery Overview of the navigation device General
CONTENTS Transferring pictures Faults Navigation Mode What is navigation? Selecting Navigation Home address Smart Guess Last destinations list The destination list Icons used Operating the last destinations list Start with existing destination Scrolling through stored destinations Displaying or editing a destination Personal destinations Contacts Selecting a destination from Personal destinations Editing Personal destinations Selecting a destination from Contacts The New destination menu 39 39 40 40 41 4
>>> CONTENTS Traffic announcements using TMC (depending on the model) 86 Live Traffic - Traffic Announcements via Data Connection (model dependent) 87 Displaying traffic messages on the map Using TMC or Live-Traffic Reading a message Taking announcements into consideration when calculating routes Automatic recalculation Manual recalculation The map display Calling up the map display Structure of the map display Map display without route guidance Map display with route guidance The Information box Split sc
CONTENTS Bluetooth® name Tools Travel Guide (model dependent) Rear View camera Displaying Rear view camera (depending on the model) Image viewer* The image viewer menu Selecting an image Enlarging the image Rotating the picture Displaying image information Slide show Settings Where am I? Traffic forecast (depending on model) Country information Blocking a section of the road permanently Trip computer (depending on model) Settings Selecting system settings The system settings menu Operation Selection opti
Warranty >>> WARRANTY 24-month warranty The company United Navigation GmbH, Marco-Polo-Str. 1, 73760 Ostfildern, Germany, provides a world-wide, 24-month warranty (battery: 6 months) for BECKER units, beginning on the day of delivery to the final customer (buyer).
SAFETY INSTRUCTIONS >>> Safety instructions ¤ Safety instructions • Use of the device is only permitted if the traffic conditions are suitable and you are absolutely sure that its use presents no risk, distraction or inconvenience to you, your passengers or other road users. Traffic laws and regulations will apply in each and every case. Destinations may only be entered when the vehicle is stationary. • The navigation system is merely an aid, data/information may in select cases be incorrect.
>>> SAFETY INSTRUCTIONS • It is forbidden to exceed the supply voltages (Volts) specified for the mains adapter, the motor vehicle charging adapter and the product. In case of non-observance, the product or the charger may be damaged, or the battery may explode. • Do not open the product or the battery under any circumstances. No modifications of the product are permitted, any such modification leads to the loss of the operating permission. • Only use original BECKER accessories.
THE NAVIGATION DEVICE The Navigation device Operating manual contents Use of the product Navigation This operating manual contains the description of your Becker navigation equipment. This manual contains descriptions for different model versions in a single document. Therefore, some of the functions described here might not be available for your equipment under certain circumstances. All pictures are similar. This product is a high performance PND (Personal Navigation Device) for use in vehicles.
>>> THE NAVIGATION DEVICE Telephone (selected models) Your Navigation device is equipped with Bluetooth® wireless technology. Via Bluetooth®, you may connect to a cell phone equipped with Bluetooth® wireless technology. Your Navigation device can then be used as a very comfortable hands-free unit. You also have the option to read out the address book or phonebook of the cell phone and to read any received short messages.
THE NAVIGATION DEVICE active.6 CE LMU BE B30 active.6 LMU plus BE B40 professional.5 LMU BE B20 professional.6 LMU BE B50 transit.
THE NAVIGATION DEVICE 12 active.7sl EU BE 2B40 BE 3B40 transit.7sl EU BE 3B40 active.
THE NAVIGATION DEVICE Transit 70 LMU BE J10 Transit 70 LMU Pro BE J11 Professional 70 LMU BE J12 TMC Becker OneShot Voice control Becker Speech Dialogue System Speed camera detector Driver warnings Telephone On-board computer Environmental zones Truck & Camper Navigation Pro Display height profile Move route ADAC Camping Guide Travel Guide Traffic forecast Driver profiles Driver profile Pro Lane assistant Pro 3D Reversing camera Connection for vehicle integration Wi-Fi® Becker Link2Live Live Traffic Liv
>>> THE NAVIGATION DEVICE Complaints In case of complaints, please consult your dealer. The equipment may be sent directly to United Navigation in its original packaging. Handling the packaging Keep the original packaging in a dry place, at least for the warranty period. Note: The disposal must be performed in a professional manner, according to the country-specific regulations. The packaging must not be combusted.
THE NAVIGATION DEVICE Cable for power supply from cigarette lighter This cable allows the unit to be connected up to the car's cigarette lighter. The power supply must satisfy the following requirements: • DC current 12/24 volts 1 amps Battery When depleted, the integrated rechargeable battery can be recharged by connecting the Navigation device to the power supply.
>>> OVERVIEW OF THE SCOPE OF DELIVERY 4 3 3 1 2 Scope of delivery 1 Basic device – PND (Personal Navigation Device) 2 USB connection cable 3 Unit holder with carrier plate (the design depending on the model) 4 Cable for power supply via the vehicle cigarette lighter (12/24 Volt) with integrated TMC-antenna (depending on the model) 5 Micro USB mains charger (selected models) In the case of devices with magnetic holders, the carrier plate 2 and car adapter cable 4 form one unit.
OVERVIEW OF THE NAVIGATION DEVICE >>> 2 3 4 1 4 Front of unit with controls and displays 1 Back button Model dependent: either on the left bottom side of the screen or in the left top corner of the housing.
>>> (model dependent) OVERVIEW OF THE NAVIGATION DEVICE Model dependent, the arrangement of the connections can differ on the bottom side of the device.
GENERAL OPERATION Maintenance and care General operation The unit is maintenance-free. For proper care, a commercially available cleansing fluid for electrical devices may be applied using a soft damp cloth. ¤ Danger! Danger to life by electrocution. Always switch off the unit and disconnect the mains power supply unit before cleaning the unit, supplied components, or accessories. Note: Do not use any aggressive or abrasive substances or cloths which may damage the surface.
>>> GENERAL OPERATION 20 Battery quality declaration Display quality declaration The capacity of the rechargeable battery in your mobile navigation system decreases with every charging/ discharging cycle. Improper storage at excessively high or low temperatures may also cause a gradual deterioration of capacity. Consequently, the operating time may be substantially reduced even in the case of a fully charged battery.
GENERAL OPERATION Using the battery The internal power supply is via the integrated rechargeable battery. The rechargeable battery is maintenancefree and does not require any particular care. You are alerted by a warning message when the battery should be recharged. After the alert, the device can still be used for approximately 10 minutes before switching off automatically. Note: Note that if the battery is completely discharged, it may take up to a minute before the device can be switched on again.
>>> GENERAL OPERATION Connection to the mains outlet ¤ Danger! Make sure that your hands are not wet and that the power supply unit is dry. Only connect the power supply unit to a permissible mains power supply. Connecting to power supply Connection to the public mains grid is achieved using the optionally available mains power supply unit.
GENERAL OPERATION Cable for vehicle integration (depending on model, optional) With a 4-pin 3.5mm jack cable you can integrate your Navigation device seamlessly into your vehicle. • connect your Navigation device to the phone mute function of your audio system. If the cable is connected correctly, your audio system will mute the car radio during navigation announcements. • connect your Navigation device to your audio system for output of the audio signal.
>>> GENERAL OPERATION Inserting the memory card > Remove the memory card from its packaging without touching or soiling the contact bar. > Hold the memory card so that the contact strip is facing towards the rear of the unit. > Guide the memory card into the card slot. > Exert a little pressure and slide the memory card into the card slot until it snaps in. Ejecting the memory card The card slot ejects the card so that you can pull it out with two fingers.
GENERAL OPERATION 2 7 1 3 2 7 1 3 6 4 6 1 2 3 4 6 7 4 Suction surface Base Lever Fastening screw Carrier plate Release button Similar to figure, on devices with magnetic holders no unlocking button is present 7 . >>> On the windscreen The unit holder can be attached directly to the windscreen using the suction mechanism. > Press the carrier plate onto the four retaining lugs of the unit holder. > Select a suitable spot to attach. > Loosen the fastening screw 4 slightly.
>>> GENERAL OPERATION Adjusting the unit holder’s position Devices with magnetic holders > Loosen the fastening screws 4 and 5 until the carrier plate 6 can be moved without using excessive force. > Move the carrier plate 6 to the required position and hold it in this position. > Tighten the fastening screws 4 and 5 sufficiently so that the Navigation device is held securely in place when the vehicle is in motion. The unlocking button 7 is not present.
GENERAL OPERATION Switching on > Press the button on the top of the Navigation device. The unit is switched on. The manufacturer's logo appears on the touchscreen. >>> > Press the button for the required language. > The selection is confirmed by pressing OK. > If you agree to the request contained in this prompt, press the OK button. > Then select the desired voice. When the Navigation device is started for the first time, the language selection is displayed automatically.
>>> GENERAL OPERATION Note: We recommend that you place the Navigation device in sleep mode in the event of short interruptions to operation (of up to a week). This significantly reduces the switch-on time and the Navigation device finds the satellites required for navigation much faster. If route guidance was active when sleep mode is activated, it is automatically resumed if the Navigation device is switched back on again within approx. 4 hours.
GENERAL OPERATION Basic information about the menus You can tell whether a telephone is already connected by the symbol on the Phone button. During operations, you are assisted by various menus and entry windows. The main menu The top menu level is the main menu. The individual applications are started from the main menu. The main menu differs in terms of content and graphical representation; an example graphic is only shown here.
>>> GENERAL OPERATION Entries made with the entry menu Some applications require entries to be made via the entry menu. The entry menu is operated in a similar way to a keypad. The keyboard layout can be switched between ABC and QWERTZ, see page “Keyboard layout” on page 138 The character entered on the keypad is displayed in the top line of the entry menu. The central area is used to enter characters. Help functions are provided in the right line.
GENERAL OPERATION Scrolling through the lists If you have already entered some of the letters of the selection you want, you can use the selection list to display all the destinations containing the combination of letters in question. > To call up the selection list, press the key. Note: The quantity of selection options is displayed in the form of the number on the button. When there are more than 300 options, the precise number is not displayed.
>>> GENERAL OPERATION Other character sets Different character sets can be selected for the keyboard of the Navigation device. > Press the button marked with an arrow repeatedly until the desired character set is selected. 32 Entering numbers Switch to the numbers keyboard in order to enter figures. > Press the button. The numbers keyboard is displayed. > In order to return again to the keyboard for entering letters, press the button marked with an arrow.
GENERAL OPERATION Deleting characters To delete the last character, use the back key. The back button The button is located on the bottom left of the device. > To delete the character to the left of the cursor, press the key. Inserting spaces If you have an entry with two words, e.g. for names of towns, the words should be separated by a space. > To enter a space, press the key.
>>> GENERAL OPERATION Installing the Content Manager You can install the Content Manager on your computer with the following steps: > Switch the navigation device completely off, see “Devices with magnetic holders” on page 26. > Connect the USB interface of the device directly to a USB port of the computer using the USB cable supplied. > Switch on the navigation device. > If the application does not start automatically, please start the file "ContentManager" manually in the folder "ContentManagerStarter.
GENERAL OPERATION > Click on Start > All Programs on the computer. > Select Becker. > Click on Content Manager. When the Content Manager is started, the program executes a number of steps before you can start to manage your navigation software content. Each time the program is called, a connection is established to the Internet to check whether a new version of the ContentManager is available. If a new software version is found, the Content Manager gives you the option of installing it.
>>> GENERAL OPERATION Transferring pictures Faults Pictures* can be saved on a separate micro SD memory card (not included in the standard delivery) or in the internal memory of the navigation device in the "Media" folder. Files can be transferred via a card reader or a USB connection. Malfunctions in the operating system or in the unit are displayed accordingly.
GENERAL OPERATION Note: A Wi-Fi® Internet connection via a local or mobile hotspot is a prerequisite for use. The data transmission may result in additional costs (home Internet flat rate or a mobile contract with data flat rate is recommended). The activation of Wi-Fi® is described in the chapter entitled Wi-Fi® Settings on page 142. The prerequisite for using lifelong map updates is the one-time online activation in the Becker Content Manager within 30 days after using your device for the first time.
>>> GENERAL OPERATION If you select a button on the left (map or self-learning navigation), a description of the download will be displayed. With the button on the right, next to the map description, you can start the download. If more than one file is available, you can choose individual maps or all maps at once. 38 Once you have made your choice, you can start downloading by selecting the Download button. The download is started and you are informed about the progress during the download.
GENERAL OPERATION Installing updates With the button in the Download Manager menu you still have to install the downloaded updates before you can use them. The button is only selectable if completely downloaded files are available for installation. The updates will also be installed after the next restart of the device.
>>> NAVIGATION MODE What is navigation? Navigation Mode The term "navigation" (lat. navigare = to travel by sea) is generally understood to mean the determination of a vehicle’s location, the determination of its direction and its distance from the desired destination and the required route to get there. Stars, prominent landmarks, compasses and satellites etc. are used as navigation tools. With the Navigation device, the location is determined by the GPS receiver.
NAVIGATION MODE Selecting Navigation Note: The menu items Set current position and Select from last destinations (fast access mode) can also be used to select a destination. Navigation mode is called up from the main menu. New destinations can be entered in the menu "New destination". Destinations that have already been visited or saved can be selected in the menu My destinations. > In the main menu, press the button My destinations.
>>> NAVIGATION MODE Last destinations list Here you can set the new home address for example using an intelligent text entry field. Smart Guess The two addresses that can be selected with the button, is a selection of the addresses last visited. Depending on the time of day and your current position, the two most likely destinations are displayed and can be selected directly. 42 The last destinations visited and saved destinations are displayed in the Last destinations list and can be selected directly.
NAVIGATION MODE Icons used The following icons are used in the destination list: Icon Meaning This destination is a standard destination with no special features. This destination is protected. If the destination memory is full, this destination will not automatically be deleted. This can be performed manually, if required. In the case of a protected entry, you can also determine the position using the fast access function.
>>> NAVIGATION MODE Option Remove protection Move up Move down Delete entry Delete all entries 44 Meaning The protection is removed from the destination. This function is only available for protected destinations. The destination is moved forwards by one position. If the destination is moved it is automatically protected. The destination is moved back by one position. If the destination is moved it is automatically protected. The destination is deleted from the fast access mode.
NAVIGATION MODE A list of the available destinations will be displayed. Using the buttons or the scroll wheel, it is possible to scroll through the list. Note: If the list contains numerous entries, it may be a good idea to search for the desired destination by selecting Search entry and using the input menu. A maximum of 1000 destinations can be imported. Newly imported destinations are filed at the start of the list. > Select the desired destination.
>>> NAVIGATION MODE 10 entries, a list of contacts is displayed straight away. > In the input menu, select the first letters of the entry you are looking for. > Press the button when the name you want is displayed in the top line. If there are 5 or fewer entries available with the letter combination entered, a list containing these entries will automatically be displayed. Note: You may also first have a list displayed that corresponds to the letter combination entered.
NAVIGATION MODE Layout of the New destination menu Enter address The various steps from selecting an address to starting route guidance can be carried out using the Enter address button. • See "Entering the address" on page 47. Select Point of Interest Points of interest such as airports and ferryports, restaurants, hotels, petrol stations or public buildings can be selected and route guidance started using the Select Point of Interest button. • See "Points of interest" on page 55.
>>> NAVIGATION MODE Selecting a country You can select a country from those available using the button for the country of destination. A country is adopted automatically in the address input menu after selection. If a country of destination has already been entered it will remain until you select a different country. > Press the button containing the country of destination to access the country selection list. The selection list appears. > Press the button for the desired country.
NAVIGATION MODE Selecting a town The destination can be entered by either using the name or ZIP code. When you enter the letters of a place, the navigation device displays suggestions (See "Accepting proposals" on page 30). If you do not want to accept the proposal, just enter the other letters of the location you want. The Navigation device excludes all impossible letter combinations and ZIP codes and activates only letter fields or numerical fields that lead to an existing location or ZIP code.
>>> NAVIGATION MODE Selecting the street In the Street menu field the street and house number can be entered separately using a letter and number field. The Navigation device excludes all impossible letter combinations and activates only those letters that could give an existing street name. A house number can only be chosen once the street has been selected and if house numbers are included in the data.
NAVIGATION MODE Selecting a house number After entering the destination town and street, you can enter a house number so as to further limit the choice. Note: Instead of entering the house number, you can also enter a junction. However, it is not possible to enter both at the same time. > Press the No. button. The input menu for the house number will appear. > Enter the house number and then press the button.
>>> NAVIGATION MODE Note: The symbols above the progress bar refer to restrictions that you may have activated (e.g. unpaved roads, toll roads). If the route guidance is already running and a waypoint has already been entered you will be asked whether the new destination should replace the old destination or the waypoint.
NAVIGATION MODE If your entry is unique, after a short time the menu for entering addresses will be displayed with your entry filled in. Entering address by speech (selected models) You can start the spoken address entry from the address entry menu by pressing the button. Notes: • Only one address can be entered using the voice entry function. Lists for more precise selection cannot be operated using speech. • The destination country cannot be entered using speech.
>>> NAVIGATION MODE If your entry was not unique or the Navigation device was not able to uniquely assign your entry, you will be shown appropriate lists. You can then select the address you want from these lists. Depending on your entry, lists with town names, lists with street names or combined lists with town and street names can be displayed. Note: Voice entry can be restarted at any time in the lists by pressing the button. The following example shows a list in which a town can be selected.
NAVIGATION MODE or you have not set a home address (because this is the first time you have used the device), these fields are greyed out. • Block road If there is not currently a route activated, this field is greyed out. More... Points of interest are divided into different categories. Route guidance is also activated in the screenshot above, so the device asks if the petrol station should be located on the route or near the destination.
>>> NAVIGATION MODE Note: You can only select points of interest in the area in question if the GPS reception is adequate for determining a position. Otherwise, the last position stored will be used. You can extend the places of interest stored on the device by installing additional POIs in KML format on your device via the Content Manager. > In the main menu, press the button New destination. Point of interest in the vicinity > Press the POI nearby button. > Press the Select Point of Interest button.
NAVIGATION MODE If you have selected the category, any points of interest belonging to the relevant category and available within the area in question will now be displayed. The name, distance as the crow flies and the address is displayed for each entry. > Select the desired point of interest. You will now receive additional information about your chosen destination. > Press the Start button to begin route guidance to the point of interest directly.
>>> NAVIGATION MODE By pressing of the button next to the selected POI, you can display the additionally available information for the destination. Entering a point of interest directly > Press the POI search by name button. Point of interest near to destination > Press the POI near destination button. > Press the Start button to begin route guidance to the point of interest directly.
NAVIGATION MODE > Press the Start to begin route guidance to the point of interest straight away. However, you can also display your chosen point of interest on the map (On map), store it in fast access mode (Save) or display the route to the point of interest (Show route).
>>> NAVIGATION MODE Selecting a destination from the map You may also select a destination directly from the displayed map. > Press the Select on map button. The map display appears. Note: You may need to make the area larger using the zoom buttons and in order to find the desired point. You can also move the map to the desired point. > Press the desired point lightly on the surface of the screen. A flashing red cross will be displayed at this point.
NAVIGATION MODE Coordinate entry You can also enter your destination using geographic coordinates. > In the main menu, press the button New destination. > Press Enter geo-coordinates. 1 2 3 > Using 2 select the value you wish to change. > Using the two buttons indicated by 1 select the direction required for the geographic longitude and latitude (east/west or north/south). > Then enter the desired values using the buttons to . The entry field at the beginning may be displayed greyed out.
>>> NAVIGATION MODE By pressing Add stage you can now add a stage to the route. After pressing Rename route you can give the route a new name. Pressing Delete route will allow you to delete the route from the stored routes. Note: If no routes have yet been stored, the route menu is empty. Selecting and starting a route > Press a route to select it. The route is loaded and displayed in the stage menu.
NAVIGATION MODE Simulation of the route There is a play button on the left under the map, used to start a simulation of the route. If you touch the display after starting, a control bar is displayed at the top with control buttons for the simulation. You can pause the simulation with the button, and continue it with the button. The button allows you to fast forward the simulation by a 16x speed. You can move from route section to route section with the and buttons.
>>> NAVIGATION MODE Editing a route > Select the route you wish to edit. > Press the button in front of the stage you wish to edit. Option Move down Delete stage > Press Add stage to enter further intermediate destinations as described above. > When you have entered all intermediate destinations, press the Done button. Replace stage The edit menu will be displayed. The following options are available: Option Show details > Give the route a name of your choice.
NAVIGATION MODE Optimising a route If you have entered several destinations for a route, you can use the Navigation device to optimise the order of the destinations for the journey distance. The route stored is retained even after optimization, however. Call up the map display for the stages of the route. Navigation settings The navigation settings contain all the settings that are relevant to the navigation functions. Note: All your settings must be confirmed by pressing the button.
>>> NAVIGATION MODE The Map view button You can select whether the map is to be displayed in 3D or 2D mode, in a split screen with 3D or 2D display or in arrow mode. You can also select whether or not 3D buildings available in towns should be displayed in 3D mode. Further setting options are available to you in the extended settings. > Press the button 4 or 5 to select whether to use 2D or 3D mode. > Press the button 1 to select the entire map. > Press the button 3 for arrow mode.
NAVIGATION MODE The following setting options are available in the extended settings: • Auto zoom You can select how the map changes when approaching an action point or at different speed. • Select POI categories You can select which symbols are displayed for points of interest on the map. • Infobox data fields In this menu you can define the data to be displayed in the Info box in the top left corner of the map view. You can select between Speed, Speed limit, Time and Height.
>>> NAVIGATION MODE Select POI categories You can select which POI symbols are to be displayed on the map. > Press the Select POI categories button in the extended settings. Selecting Show all POIs displays all points of interest on the map. Selecting Show no POIs displays no points of interest on the map.
NAVIGATION MODE >>> > Confirm your setting in the Advanced menu by pressing the button. Note: This setting is only available in the 3D view. Under these options, you can select displays for the travel without a selected route. Here you can only select between Speed, Speed limit, Time and Height. 3D city view With this option, you can select whether or not 3D buildings available in towns should be displayed in 3D mode or not.
>>> NAVIGATION MODE The Route overview button The Guidance info button With the options in this setup menu you can select the Points of Interest to be displayed and whether TMC reports are displayed in the map view when pressing the Route overview button. > Activate the option All Destinations. In the Guidance info settings window you can select which additional information you would like displayed during route guidance. > Press the Guidance info button in the settings menu.
NAVIGATION MODE Setting Signposts Detour Assistant Parking Assistant ExitAssistant Meaning When this function is activated, you receive additional important information at traffic junctions about the sign you should follow. If this function is activated, the Assistant will help you to avoid traffic jams or traffic disruptions. The responsiveness can be adjusted with 3 sensitivity settings. If this function is activated, the Assistant will help you to choose a car park at the destination.
>>> NAVIGATION MODE The Route options button You can edit your driving profile in the Route options settings window. The settings made here have an effect on the route selection and on the calculation of the estimated journey times. > In the settings menu, press the Route options button. Selecting the vehicle profile (depending on model) This setting influences the calculation of the expected time of arrival and blocks e.g. motorways for the bicycle setting.
NAVIGATION MODE The window for selecting the maximum speed is displayed. Select a speed and exit the speed menu with the back button . > Exit the vehicle selection menu, too, with the back button . The selected vehicle type is now displayed. The required profile is displayed once selected. Truck and mobile home functions (depending on model) You can select or set the vehicle profile. For the truck profiles (depending on the model), you can define or select dimensions, weight, number of axles etc.
>>> NAVIGATION MODE You have different operation options in the car or truck profile menus displayed. You do not have any further setting options for all other profiles. For the car profile: Setting truck profiles Notes: This function is only available with models with optimized route navigation for trucks, busses and mobile homes. > Select one of the saved truck profiles or the general truck profile.
NAVIGATION MODE Setting trailer and axles > In the profile settings, press the button for the trailer and axle settings. 1 > Use the 1 button to select whether there is a trailer ( ) or not ( ). > Select the total number of axles. > Confirm your settings by selecting . > Press the button next to the weight to be entered. An entry menu will appear. > Enter the desired weight. > Confirm the entry in the entry menu by pressing .
>>> NAVIGATION MODE Selecting vehicle category and name Once you have changed one of the truck profiles, you have the option to enter the displayed truck symbol and name. > Press the 2 button to change the displayed symbol. Option Fast route 1 2 > Select the desired symbol. The new vehicle category is displayed in the profile. > Press the 1 button to enter another name. The entry menu will appear. > Enter the desired name. > Confirm the entry in the entry menu by pressing . The name is changed.
NAVIGATION MODE Time-dependent route guidance If this function is switched on ( ), information (statistical information) on the possible speed on certain segments at certain times of the day is also taken into account in the route calculation, provided this is available. This provides a more accurately calculated arrival time and may even result in a different route being selected. Avoiding particular types of road After pressing the button Avoid you can exclude various types of road (e.g.
>>> NAVIGATION MODE Setting Rerouting Meaning This button allows you to choose whether the route change should be made Never, Automatically or Manually. (See "Taking announcements into consideration when calculating routes" on page 89.) The setting Never is equivalent to switching off the TMC function. > Confirm your settings by pressing the button. An automatic search procedure presets the transmitter with the best reception. The currently received TMC-transmitter appears on the display.
NAVIGATION MODE • Volume You can select the standard volume for voice announcements for each start of the Navigation device, or switch off voice announcements completely. • Interior noise level With the Interior noise level button, you can adjust the speed-dependent volume control. To do this, select the interior volume level suitable for your vehicle.
>>> NAVIGATION MODE Setting the Volume With the Volume settings window, you can set the standard volume for voice announcements for each start of the Navigation device, or switch off voice announcements completely. Depending on the situation, this setting can be fitted into the map display. > In the Voice guidance settings window, press the Volume button. The Volume settings window appears. > Select the desired volume with the and buttons or the scroll wheel.
NAVIGATION MODE Note: Operating the speed camera warning, or carrying it with you so that it is ready to be operated, is a regulatory offence in Germany and is therefore prohibited. Additionally, it may constitute a violation of the law in other countries too. Before starting your journey, please find out about the regulations that are currently valid in the countries in which you are travelling. United Navigation GmbH accepts no liability for the legality of the installation or use.
>>> NAVIGATION MODE Setting environmental zones (depending on model) You can let yourself be warned about environmental zones provided that this information is saved in the card material and is supported by your navigation system. This function can be activated or deactivated . By pressing the symbol with the bell, you can set the audible warning signal ( audible warning signal activated). > Confirm your settings by pressing the button.
NAVIGATION MODE Setting Out of city The following settings are available. Setting Show signs In city Meaning Select whether speed limits are never displayed, always displayed or only displayed if the limit is exceeded. Furthermore, you can select whether the sign should blink when exceeding the speed limit, by selecting Always or If speed limit is exceeded. Select the amount over the speed limit at which you would like to receive an acoustic warning within built-up areas.
>>> NAVIGATION MODE > Select the blocked road you want. The road is currently blocked for all days of the week, for the whole day . You can now set whether or not the road should be blocked for each day of the week. > Press the buttons with the days on which the road should not be blocked . > Press the clock symbol under one of the days and limit the block of this day to the required time of the day. 84 You can now set whether or not the road should be blocked for each day of the week.
NAVIGATION MODE The Vehicle data button This menu allows the calculation of an economic route by using the fuel consumption of the vehicle. > Press the Vehicle data button. >>> The Format button > Press the Extra-urban button to enter the average fuel consumption of the vehicle outside cities. This can be entered as described for the In city value. In the Format settings window you can set the measurement units to be used for times and distances. > In the settings menu, press the Format button.
>>> NAVIGATION MODE The Time button The Reset button You can select the time zone relevant for your location in the Time settings window. This setting is important for the correct calculation of the estimated time of arrival. > Press Time in the settings menu. You can reset the navigation settings to their factory settings. The settings will then be reset. The fast access mode data, stored routes, blocked routes, voice and home address are retained. The Time settings window appears.
NAVIGATION MODE Note: As the traffic announcements are transmitted by radio stations, we cannot assume responsibility for the completeness or accuracy of the announcements. Austria: The location and event code was made available by ASFINAG and BMVIT. The Navigation device constantly checks whether there are any relevant announcements for the route that has been set. All traffic problems that have been received are shown on the map.
>>> NAVIGATION MODE Displaying traffic messages on the map Using TMC or Live-Traffic The latest traffic messages are represented graphically on the traffic overview map. Sections of the route where there are traffic problems are highlighted blue. Arrows indicating the traffic direction which is affected by the traffic problem continue to be displayed. The use of TMC is described below, Live Traffic behaves similarly here.
NAVIGATION MODE The part of the route with the travel direction 4 If a TMC message lies on your route, the message is indicated by the sign . Traffic announcements received via Premium-TMC are indicated by the symbol. 3 5 A red twisted arrow next to the traffic report warns for traffic jams that need to be avoided. If the arrow is crossed out in grey and red , the route does not go around the traffic jam. Reading a message > Press on the desired message in the list.
>>> NAVIGATION MODE If, after displaying the traffic message, the navigation system detects that a sensible alternative route is possible, the following display appears. Note: This display may also appear if, for example, a previously obstructed route is now free again. The display provides you with an overview of the alternative route calculated. 90 The red route or route marked blue for an obstruction shows the previous route. The route marked yellow displays the alternative route calculated.
NAVIGATION MODE Structure of the map display 1 The structure depends on the settings made in "Map display options" on page 99 or in "The Map view button" on page 66 and whether route guidance is active or not.
>>> NAVIGATION MODE Your current position is displayed on the map via the position icon. The Information box During route guidance you can have information displayed in the Info box. 1 92 2 If you press the Info box again, more or less fields are displayed. At least one field and a maximum of three fields can be displayed. The information displayed depends on the settings that are selected in the Navigation settings in the map view menu > Advanced > Info box data fields.
NAVIGATION MODE Split screen with route guidance 14 1 7 13 3 8 11 2 15 4 12 6 10 1 2 3 4 5 6 7 9 5 Speed limit on the road currently being driven on (display not available for all roads), signs for the driver alerts will also be displayed Driver alerts (depending on the model) Zoom buttons Vehicle position Power level/telephone status (depending on the model) Button for calling up the options Traffic lane recommendation (only appears on some multi-lane roads; green arrows = recommended lanes) N
>>> NAVIGATION MODE 10 Traffic lane recommendation (only appears on some multi-lane roads; green arrows = recommended lanes) Note: If you follow the lane recommendation, the next driving maneuver is possible without changing lanes. 11 Current street or street to which the next driving maneuver leads to the next driving maneuver 13 Calls up volume settings 12 Distance Lane Assistant Pro 3D (model dependent) You can display an animated realistic representation of the lane at many junctions.
NAVIGATION MODE Note: The tunnel view provides a schematic view of the route layout of the tunnel. The whole tunnel layout, the first route section and the vehicle position are displayed. Since there is no GPS signal during the travel through the tunnel, the displayed position is only calculated. Using the map display Repeating the last announcement During route guidance, the system announces important information, e.g. the next driving manoeuvre.
>>> NAVIGATION MODE An x now appears next to the speaker symbol . With pressing the button, you can make the volume control elements disappear. > Press again the speaker symbol in the preview area to mute the voice again. ¤ Map zooming The map can be zoomed into in steps by using the zoom buttons. > Press the button. The zoom buttons are displayed. Warning! Always adjust the volume so that you can still hear any ambient noise while driving.
NAVIGATION MODE Map orientation When a route is activated, the map view can be oriented in different ways. If you have selected a 2D view in the Navigation settings in the map view (see page 64), this pertains to the compass direction only. > Press the 2D map view on the display a little longer. You can orient the map for example in the direction of travel. If you have selected a 3D display for the map view, the vertical display angle can be adjusted, too.
>>> NAVIGATION MODE number of TMC announcements and POIs are displayed. > Press one or more buttons to display TMC events or POIs. A list of POIs and, if applicable, TMC events is displayed with the expected arrival time and distance from the current vehicle position. > Press the desired Point of Interest or TMC event. Information such as the address and the telephone number of the POIs or the type of traffic obstruction are displayed.
NAVIGATION MODE > Press the symbol. A message is displayed with the question "You are probably standing in a traffic jam. Would you like to avoid the jam using a detour?". Now you can have the suggested detours displayed and select or reject them. If the vehicle is not on a motorway, the detour assistant calculates possible alternative routes before the next crossing in case of strong stop-and-go traffic to get you there faster.
>>> NAVIGATION MODE Note: The scope of the displayed functions depends on whether route guidance or a route with several destinations is active. The options menu is exited either by selecting a function or by pressing the button. Displaying the whole route Move route (model-dependent) (Only available when route guidance is active.) You can have the whole route to the destination displayed on the map. Additionally, you can have a complete route description displayed.
NAVIGATION MODE New route The distance and journey time of the new route are displayed immediately underneath. You can set the route options using the Options button. By pressing the Play button, the whole route can be simulated. The control elements, that are displayed by touching the screen shortly, allow you to play the simulation in up to 16x speed, or to step from route section to route section. The simulation can be stopped by pressing the back button.
>>> NAVIGATION MODE > Select Block for current route to block the section of the route for the current route guidance session only. Note: If the route section is more than 10 kilometres long, you can choose, in another menu, whether to block the entire section or just part of it. > Select Block permanently to block the section of the route for future route guidance sessions too. Changing of the blocking times is described on page 131.
NAVIGATION MODE Canceling route guidance Entering/deleting a stopover (Only available when route guidance is active.) You can cancel the active route guidance. > Call up the options menu for the map display. (Only available when route guidance is active.) With this function, you can enter a stopover, or you can delete an entered stopover. > Call up the options menu for the map display. > Press the Stop guidance button. This cancels route guidance to all destinations. > Press the Add stopover button.
>>> NAVIGATION MODE Blocking route temporarily Using the Block road ahead option, you can block a stretch of road ahead temporarily. This determines a certain stretch of road that should not be used. The Navigation device will now try to calculate a detour. Notes: • The selected length of the block is only an approximation since the actual distance blocked depends on the availability of an exit. > Call up the options menu for the map display. > Press the Block the road ahead button.
NAVIGATION MODE Displaying current position (Where am I?) You can display your current position, make an emergency call (depending on model), select a hospital or filling station and save this position. Furthermore, you can display information regarding the current GPS reception and the current country. > Call up the options menu for the map display. number 112 (depending on model) if a mobile telephone is connected to your navigation system and has reception.
>>> NAVIGATION MODE Entering the destination You can see how many satellites are being received, and whether the satellite reception is good enough for navigation. The current time and the geographic position are also displayed. (Only available when route guidance is not active.) You can enter a destination. > Call up the options menu for the map display. > Press the Enter destination button.
NAVIGATION MODE >>> Skipping a destination If a planned route with several destinations is active, you may delete the current destination of the route. Route guidance to the next destination is then started. This may be necessary if a destination was not driven to directly. The Navigation device otherwise tries to guide you to the current destination. > Call up the options menu for the map display. > Press the Next destination button. Route guidance to the next destination is started.
>>> SUPPLEMENTARY FUNCTIONS FOR TRUCKS AND MOBILE HOMES (SELECTED MODELS ONLY) Depending on the selected settings (see page 74 onwards), a number of helpful supplementary functions are made available to you. Supplementary functions for trucks and mobile homes (selected models only) Feedback after route calculation When calculating the route, the best possible route is selected by taking the vehicle or loading specifications into consideration if possible.
SUPPLEMENTARY FUNCTIONS FOR TRUCKS AND MOBILE HOMES (SELECTED MODELS ONLY) described in the chapter "Feedback after route calculation". You have the following options: 1 Press the button to close the message. 2 enlarge the display area if another restriction lies ahead of you. The message will close automatically once you have left the critical area. In addition, the message closes automatically when you approach a new road section with a restriction.
>>> OTHER ADDITIONAL FUNCTIONS (ONLY SELECTED MODELS) Display height profile You can display a height profile from the Show route or Alternative routes view. To do this, select the button. Other additional functions (only selected models) Height profile for alternative routes: Height profile for a route: You can use the and buttons to adjust the zoom level and move to the left or right to shift the height profile.
TELEPHONE MODE If your navigation device has an integrated Bluetooth® wireless technology interface, you can connect it to a mobile phone equipped with Bluetooth® wireless technology. Your Navigation device can then be used as a very comfortable hands-free unit. Telephone mode Note: • For some cell phones equipped with Bluetooth® wireless technology, it is possible that some of the functions described are not available. • The following descriptions assume that Bluetooth® is activated on the cell phone.
>>> TELEPHONE MODE The Navigation device now attempts to reconnect the cell phone last connected. When the connection is established, the telephone menu is displayed after a short period. If no cell phone has been connected yet or if the device last connected is not available, the following display is generated. > Press the Yes button to find Bluetooth® cell phones as described in "Searching for cell phones" on page 118.
TELEPHONE MODE Note: Press the button to delete the characters entered. > Press the Dial button. The Navigation device then attempts to establish a connection to the phone number entered. You can find out how to continue operation in "Telephone calls" on page 120. Phonebook In the phonebook, the system displays the phonebook entries loaded from the SIM card and from the memory of the cell phone. After selecting the desired entry, you can call the respective phone number.
>>> TELEPHONE MODE > In the input menu, select the first letters of the entry you are looking for. Note: • For example,if you entered the letters "M" and "I", the entries are displayed whose last names or first names start with "MI". That means, "Miller John" or "Bauer Michael". • You may enter the first letter of the last name and then enter the first letter of the first name separately using a space (button ).
TELEPHONE MODE Call list In the call list, the last dialled, answered or unanswered numbers or names are displayed in chronological order. If possible, the numbers or names of the list stored in the cell phone are also displayed in different lists. > In the telephone menu, press the Last calls button. Each row of the call list is divided into fields. Each list field is designed as a button. On the right button, the number/ name is displayed and the features of the entry are displayed with the left icon.
>>> TELEPHONE MODE Dialing an available number You can dial the numbers/names in the call list directly. > To initiate the call, press the button with the entry you want. The call will be initiated. Displaying or editing entries Each entry contained in the call list can be displayed or edited. > Press the button field on the left next to the entry you want. A selection menu appears. Selection Meaning Show details The data for the entry is displayed (number and name, time and date of call, if available).
TELEPHONE MODE Connecting Bluetooth® telephones So that you may make and receive calls with your Navigation device, a cell phone that is equipped with Bluetooth® wireless technology must be connected to the Navigation device. The following describes the various options for establishing a connection. Calling up a device list > In the main menu, Telephone button. The device list shows line by line all cell phones that were already connected to the Navigation device.
>>> TELEPHONE MODE Automatic connection After activation, your Navigation device attempts to establish a connection to the cell phone last connected. You can switch this function on or off as described in "Automatic connection" on page 123. Prerequisites for a successful connection are: • On your Navigation device, Bluetooth® wireless technology is switched on. (See "Bluetooth®" on page 123.) • The cell phone is switched on, is within range, and Bluetooth® wireless technology is activated.
TELEPHONE MODE Connect new devices You can initiate a connection to another mobile phone using the Devices button located in the telephone menu at the lower right hand corner of your screen. If a cell phone is already connected, that connection is automatically disconnected and the new device is connected. > Click on Devices Connecting a mobile phone You can also attempt to establish a connection to the Navigation device from the mobile phone.
>>> TELEPHONE MODE Telephone calls In the telephone calls section, you can find a summary of the control options that are available for establishing a call, accepting a call, and ending a call. Accepting a call For an incoming call, a ringing tone will sound. Also the following is displayed. Establishing a call > Enter the telephone number or select an entry from the call list or telephone book. If the call is accepted by the party called, the display changes and you are connected to the other party.
TELEPHONE MODE Ending a call During a call You can end an active call. During a call, you have various control options. >>> > To call the options menu of the call screen, press the Options button. > In the call screen, press the End call button. The call is ended. The screen last active is displayed. Note: The call is also ended if the other party hangs up. The screen last active is also displayed.
>>> TELEPHONE MODE • Private mode/Hands free You can transfer a call back to the cell phone. The hands-free function is then ended. After the call is ended, the connection to the cell phone is automatically reestablished. Press the Private mode button. The hands-free function is ended. Press the Hands free button to make and receive calls again via the Navigation device prior to ending the call. Telephone settings The telephone settings include all the settings relevant for the telephone mode.
TELEPHONE MODE Bluetooth® Automatic call acceptance Telephone volume With the Bluetooth® button, you can switch Bluetooth® on or off. With this function, you can set whether or not or after which time an incoming call is accepted automatically. With this function, you can set the volume of the ringtone and the volume of the call. > In the settings menu, press the Answer call automatically button. > In the settings menu, press the Volume button.
>>> TELEPHONE MODE Updating the phonebook Bluetooth® name With this function, you can update or retransfer the stored phonebook entries in the Navigation device. With this function, you can assign a name for your Navigation device. This assigned name will then be displayed by other Bluetooth® devices. > In the settings menu, press the Refresh button. Be aware that it may take several minutes to load the phonebook. > In the settings menu, press the Bluetooth® name button. > Enter the desired name.
TOOLS Under Tools, the following functions are grouped together, depending on the model: • Marco Polo City Guides • Image viewer • Country information • Overview of functions • Blocking a section of the road • Trip computer The Tools menu is called up from the main menu. Tools Travel Guide (model dependent) With the travel guide, you can select, for example, MARCO POLO TopHighlights or MARCO POLO Insider Tips and start the guide destination there. See "Travel Guide (model dependent)" on page 59.
>>> TOOLS The image viewer menu Selecting an image In the image viewer menu, you can select images, start a slide show and call up the settings. 3 A message is displayed stating that the image viewer must not be used when driving. Please observe this warning. > Confirm the message by pressing the OK button. The image viewer menu appears.
TOOLS Press the buttons to the left and right of the image to move to the next or previous image. Press the centre of the image to hide the image menu. Press the right- or left-hand side of the screen to move to the next or previous image. Press the centre of the image to show the image menu again. Enlarging the image > Show the image menu. > Press the Zoom button. Displaying image information > Show the image menu. > Press the EXIF button.
>>> TOOLS Slide show Traffic forecast (depending on model) In the slide show, all the pictures in the current folder level are automatically displayed sequentially. > Press Slide show in the image viewer menu. The image display changes to full screen display and initiates the slide show according to the settings made, with the first image in the current folder level. The slide show will end once all images have been displayed. Press the button to stop the show before the end.
TOOLS • With the and buttons you can change the section of the map. • With the button you can display the complete route on the screen if available. >>> Country information The country information enables you to display country-specific information for numerous countries (maximum permitted speed, alcohol limits, etc.). The country-specific information is displayed (maximum permitted speed, alcohol limits, etc.). Click on these symbols to display additional information.
>>> TOOLS Symbol Meaning Speed limit in built-up areas Speed limit outside built-up areas Speed limit on motorways Speed limit on main roads Alcohol limit Reflective jacket requirement Driving lights requirement during daytime Tow rope must be carried Blocking a section of the road permanently With the Block option you can block individual route sections permanently. The Navigation device then calcu-lates a diversion to avoid a traffic obstruction.
TOOLS > Using the buttons 1 set the first period when the road is to be blocked on this day. > Using the buttons 2 set the second period when the road is to be blocked on this day if necessary. The road is currently blocked for all days of the week, for the whole day . You can now set whether or not the road should be blocked for each day of the week. > Press the buttons with the days on which the road should not be blocked .
>>> TOOLS Press the Stop button to stop the recording. The time continues if you press the Start button again after stopping the recording. Press the Reset button to delete all recordings and reset all times to zero. Travel time without breaks in the journey 7 Travel time with breaks in the journey 8 Compass 9 Calls up the stopwatch with lap recording 6 Press the Reset button to reset the values to zero. > Press the Lap button to stop the current recording and start a new lap recording.
SETTINGS Selecting system settings Settings You can change various basic settings for all applications on the Navigation device. > In the main menu, press the button. The system settings menu You can select the various settings optionsfrom the system settings menu. >>> Operation Selection options Select the desired menu item by pressing the appropriate button. The functionality of the buttons varies depending on the selection and is described under "The individual menu items" on page134.
>>> SETTINGS The individual menu items Battery Your Navigation device may be operated using an external power supply unit or an integrated rechargeable battery. Note: The current charging state is important when operating with a battery. If the battery is low on power, it may not be possible to continue navigation right to the destination. The power level is shown in the charge display. In the example, the battery still has around two-thirds charge.
SETTINGS • Bottom icon: The function is switched off, the Navigation device does not switch off automatically. The following display is shown during automatic switch-off. Day/night display You can set the Navigation device display to day, night or automatic. The automatic setting changes automatically between day and night display depending on the time, the current position and the time of year.
>>> SETTINGS Design by day With this option, the menu and map display during the day can be switched to the colours and contrast of night display. Design by night Two schemes with different contrasts are available to select for the map display at night. Press the Design by night button. > Press the Design by day button. Select the option on the bottom to set a lighter night display for the map view. > Select the Dark design option for a dark display during the day.
SETTINGS Setting the colour You can change the colour of the icons and other design elements. Language The texts on the touch screen can be displayed in a variety of languages. > Press the Colour schemes button. Opening language selection You can choose between the various languages using the following button: 1 2 > Press the Language button. The language selection appears. > Select one of the eight predefined colours. or > Select the required colour using the slider 2 at the bottom of the display.
>>> SETTINGS Keyboard layout You can switch the sequence of the keyboard layout by selecting the corresponding key. Sounds You can switch the Navigation device signal tone on and off. This also includes the clicking of the touch screen buttons. > Press the Tones button. Depending on the previous setting, the signal tones are switched on or off. Selection Meaning Manual It is possible to manually switch over to the reversing camera.
SETTINGS Driver profiles (depending on model) You can select 4 different driver profiles. You select the corresponding profile by pressing the Profile 1 – Profile 4 button. You must then restart the navigation system. The following ..
>>> SETTINGS Deleting driver profile You can delete the saved profile data by pressing the Delete profile button. The profile itself will still remain. If the profile was renamed previously, it will then be renamed to the original name again (Profile 1 – Profile 4). 140 Driver profile Pro (model dependent) Besides the functions described in the previous chapter, a Bluetooth® telephone can be used for automatically changing the profile on devices with Driver Profile Pro.
SETTINGS Service information The following button displays information regarding the Navigation device. > Press the Information button. The information display appears with the software version number. Factory settings You can reset your Navigation device to the factory settings. The following updated data is deleted: saved destinations, saved routes, the home address, telephone data, images, videos etc. saved on the internal memory.
>>> WI-FI® SETTINGS (MODEL DEPENDENT) You can establish a data connection to a Wi-Fi® network (a telephone, for example) from your navigation system. This function requires that there is a mobile device in range which can be used as a Wi-Fi® hotspot. Please refer to the operating instructions for your smartphone to see if/how you can use your smartphone as a mobile hotspot. Press the Wi-Fi® settings button in the Settings menu.
TECHNICAL TERMINOLOGY GMT (Greenwich Mean Time) Central European Time standard Standard time at 0 degree longitude (the longitude intersecting Greenwich, Great Britain). This time is used worldwide for synchronization of data collection. Technical terminology Bluetooth® wireless technology Technology for wireless data transmission at short range up to 10 metres. GPS (Global Positioning System) GPS determines your actual geographical position by the use of satellites.
>>> TECHNICAL TERMINOLOGY TMC (Traffic Message Channel) Traffic announcements transmitted by most FM stations via RDS. Basis for dynamic navigation. USB (Universal Serial Bus) The Universal Serial Bus (USB) is a bus sytem for interconnection of a computer with external USB peripherals for the exchange of data. Wi-Fi® Wi-Fi® stands for "Wireless Fidelity" and is a worldwide wireless LAN Standard. Devices with the Wi-Fi® label are compatible with each other and can exchange data.
index INDEX Numerics 3D display . . . . . . . . . . . . . . . . . . . . . . . . . 66 A Adjusting the map view . . . . . . . . . . . . 66 Announce streets . . . . . . . . . . . . . . . . . . 79 Automatic call acceptance . . . . . . . . .123 Automatic connection . . . . . . . . 118, 123 B Block . . . . . . . . . . . . . . . . . . . . . . . . . . . .104 Blocked roads . . . . . . . . . . . . . . . . . . . . . 83 Blocking a section of the road . . . . . .104 Blocking a section of the road permanently . . . .
>>> INDEX I N R ID3 tag . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Image viewer . . . . . . . . . . . . . . . . . . . . 125 Intended purpose . . . . . . . . . . . . . . . . . . .7 Intersection . . . . . . . . . . . . . . . . . . . . . . . 50 Navigation . . . . . . . . . . . . . . . . . . . . . . . . 40 starting . . . . . . . . . . . . . . . . . . . . . . 51 terminating . . . . . . . . . . . . . . .29, 103 Number list Dialing a number . . . . . . . . . . . . 116 Number lists . . . . . . . .
INDEX Short route . . . . . . . . . . . . . . . . . . . . . . . . 76 Slide show . . . . . . . . . . . . . . . . . . . . . . .128 Speed limit . . . . . . . . . . . . . . . . . . . . . . . . 82 Stopover . . . . . . . . . . . . . . . . . . . . . . . . .103 Deleting . . . . . . . . . . . . . . . . . . . . .103 Switching on the navigation device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 System settings . . . . . . . . . . . . . . . . . .133 Vehicle profile selecting . . . . . . . . . . . . . .
>>> MODEL OVERVIEW AND TECHNICAL SPECIFICATIONS Model overview and technical specifications Weight Processor speed in MHz Flash memory SD-RAM Battery capacity (Li-polymer) TMC Holder for vehicle integration Bluetooth® hands-free device Dimensions in mm (W x H x D): Screen diagonal Display resolution Display resolution in pixels Capacitive touch display Micro SD card reader USB interface 1 Internal loudspeaker Power supply USB power supply 100-240V 50-60 Hz Compatible with HR holders Model overview and tec
MODEL OVERVIEW AND TECHNICAL SPECIFICATIONS active.7s EU BE 2B30 BE 3B30 active.5sl EU BE 2B10 BE 3B10 active.7sl EU BE 2B40 BE 3B40 transit.
MODEL OVERVIEW AND TECHNICAL SPECIFICATIONS 150 Transit 70 LMU Pro BE J11 Professional 70 LMU BE J12 Weight Processor speed in MHz Flash memory SD-RAM Battery capacity (Li-polymer) TMC Holder for vehicle integration Bluetooth® hands-free device Dimensions in mm (W x H x D): Screen diagonal Display resolution Display resolution in pixels Capacitive touch display Micro SD card reader USB interface 1 Internal loudspeaker Power supply USB power supply 100-240V 50-60 Hz Compatible with HR holders Navigation
NOTICE >>> Dear customer, In conformance with current EC guidelines, any person may operate this unit. This unit conforms to the current valid European or harmonized national regulations. This designation is your guarantee that the unit conforms to the applicable specifications concerning electromagnetic compatibility.
>>> NOTICE Disposal of the unit Customer information on the disposal of electrical and electronic devices (private households) According to the self-proclaimed corporate principles of United Navigation GmbH, your product has been developed and manufactured from high-quality, recyclable materials and components. This symbol on the product and/or accompanying documentation means that electrical and electronic products must be disposed of separately from the houshold garbage at the end of its service life.
NOTICE >>> Disposal of the battery Duty to supply information according to battery legislation (BattV) Batteries must not be disposed of in household waste. It is the duty of the user to return used batteries. Please only dispose of batteries via specialised dealers or at battery collection points. In this way, you make a positive contribution to environmental protection.
>>> NOTICE 4 2 2 3 1 3 4 1 > Completely discharge the battery (leave the unit switched on with no power supply until it automatically switches off). > Unscrew and remove the housing screws 1 (model dependent) using a small screwdriver. > Lever off the rear of the housing 2 using a flat-blade screwdriver (placed at the slits on the sides of the housing). > Remove the circuit board if necessary; to do this, you first have to remove the screws of the circuit board (model dependent).
NOTICE >>> For devices without screws on the bottom side of the device (model dependent): > Completely discharge the battery (leave the unit switched on with no power supply until it automatically switches off). > Lever off the front cover using a flat-headed screw driver (placed between the display and display frame). > Remove the 5 screws. > You can now lever off the front of the device from the back panel using a flat-headed screw driver.
>>> NOTICE 156
FMI-12523