Operation Manual
85
1DYLJDWLRQRSHUDWLRQ
6HOHFWLQJQDYLJDWLRQ
Press multifunction button.
The main navigation menu appears after this display.
1RWH The navigation CD must be loaded when starting
navigation operation for the first time.
If the navigation system has not yet been calibrat-
ed, a calibration journey is prompted (see Installa-
tion Guide).
A navigation CD with the data for the destination
country is required for navigation operation.
The navigation CD must be inserted to start the
route calculation. During the calculation, the
prompt
flashes on the display. Once the calcu-
lation has been completed, the prompt
extin-
guishes, the navigation CD can be removed and an
audio CD can be inserted.
When entering destinations, driving off should be
delayed until the prompt
disappears.
0DLQQDYLJDWLRQPHQX
Selection from
!!,
!Y&,
YYY,
! !! ,
can be made by turning the right rotary control , and con-
firmed by pressing the right rotary control .
•
!!
accesses the entry menu for the destination.
See ”Entering destination” on page 86.
•
!Y&
contains destinations which have been stored previously.
See ”Destination memory” on page 107.
•
YY
Menu for the selection of special local and interregional
destinations and special destinations nearby. Special des-
tinations are e.g. petrol stations, airports or hospitals See
”Special destinations” on page 107.
1DY
#! !#!B
#!
!Y&
YY