Operation Manual
135
8VHUPHQX
5HTXHVWLQJTXLWWLQJXVHUPHQX
After requesting the user menu, the following basic settings
can be selected on two planes according to your personal pref-
erence.
First plane:
•
(3 - speed-dependent volume control
•
!,3telephone characteristics
•
63 - display colour setting
•
*+display setting
•
,+LED setting
•
F reception optimisation setting
Second plane:
•
(= - navigation announcement setting
•
<? - aux input setting
•
47 - compass display setting
•
,# - signal tone volume setting
The user menu is requested by pressing the button for
more than 2 seconds.
In order to access the second plane of the user menu, press the
multifunction button.
Press the button again to quit the user menu.
*$/VHWWLQJ*DO
The GAL is a car radio control circuit, which automatically
adjusts the car radio volume according to vehicle speed. This
results in compensation of the driving noise produced at high-
er speeds.
Request the user menu. Press the multifunction button.
Using the right rotary control select either
or R.
With the GAL setting, the start of volume adjustment can be
specified according to vehicle speed.
The setting is stored automatically.
Explanation:
•
- no volume increase
•
R - volume is increased at low speed
•
R - volume is increased at a higher speed
)EAP
(3 !,3 63 *+ ,+ F SM
SM
(3
)EAP
(3 !,3 63 *+ ,+ F SM