User Guide

ManualsBrandsBecker ManualsOther7802 DTM UPDATECD1 3

Navigation CD 3.X

Subject to errors and technical modifications 14 Copyright by Becker GmbH, D-76303 Karlsbad

If you received this operation guide update when purchasing

a new unit, the functions and modifications described from

page 15 are intended as a supplement to your operation guide.

If you received this operation guide update together with an

update CD, the update procedure and the new functions and

modifications are described on the following pages.

Installation of CD 3.X

In order to install CD 3.X, remove the old CD and insert the

new CD 3.X.

After a short time, the following display or a similar display

appears.

Using the right rotary control select,

"! and press to

confirm.

The navigation and radio software is updated.

A progress bar appears on the display.

During updating, the ignition should be switched on and the

vehicle should not be moved.

VOVV

!





Summary of content (12 pages)

PAGE 1
Navigation CD 3.X If you received this operation guide update when purchasing a new unit, the functions and modifications described from page 15 are intended as a supplement to your operation guide. Installation of CD 3.X In order to install CD 3.X, remove the old CD and insert the new CD 3.X. After a short time, the following display or a similar display appears.
PAGE 2
Navigation CD 3.X Modifications to navigation mode Navigation CDs The following modifications have been made to navigation mode or the following new functions have been added. Two navigation CDs are supplied with the navigation unit. These CDs contain a digitised street map. One CD for Northern Europe (CD no. 1) and one CD for Southern Europe (CD no. 2) are supplied. The complete trunk road network and all destination centres in the digitised area of Northern and Southern Europe are available on the CDs.
PAGE 3
Navigation CD 3.X For example, if you wish to navigate from a town on the Southern Europe CD (D) to a town on the Northern Europe CD (B), enter your destination address as usual. After entering the town, you will be prompted to insert navigation CD No. 1 by the display ! # . After inserting the relevant CD, enter the road and, if required, the house number or the town centre. The required map data is loaded and stored internally after route calculation has started.
PAGE 4
Navigation CD 3.X tioned list. In that case, the location name is to be entered as described in „Entering the destination“. The program returns to road or centre entry. If there are no streets in the selected town or only the centre can be selected, the unit will switch directly to the route menu. Selecting destination via post code The destination can also be selected via the town’s post code.
PAGE 5
Navigation CD 3.X Switching the speed limits display on/off LONGITUDE P If the speed limits display is ON, the system will inform you of the maximum permissible speed limit for the route along which you are travelling during route guidance, insofar as this information is available. YYYYYYYYYYYYYYYYYYYYYYYYYYY YYY YYYYYY Enter the longitude of the destination using the right-hand rotary control as described above.
PAGE 6
Navigation CD 3.X If, when the speed limit display is ON, you travel along a route with a speed limit and this speed limit is stored on the navigation CD, the corresponding symbol will appear on the right-hand side of the display indicating the speed limit. Dynamic navigation with TMC Note: TV T Y P The distance to the next point at which for example a turn should be made is displayed below the navigation arrow, which appears in reduced format.
PAGE 7
Navigation CD 3.X Note: Traffic announcements are transmitted by radio stations, therefore we cannot accept any responsibility for the completeness and correctness of the announcements Note: If dynamic route guidance has been activated, a continuous check is made for the presence of relevant announcements for the selected route. The route is then calculated using the "fast route" option, while taking into account current traffic announcements.
PAGE 8
Navigation CD 3.X tion is shown in its entirety. A typical traffic announcement is shown as follows. Displaying traffic information Current traffic announcements can be displayed in text form. To call up the DTM Menu, press the '70 button. */5,3:,5 69+ <08)695 %05. 0+,3:;,+; By pressing the multifunction button , a list of all currently available traffic information will be displayed.
PAGE 9
Navigation CD 3.X Direct programming enables a TP transmitter to be programmed that is not the FM station being received. For example, one FM station can be received while TP announcements transmitted by another FM station are switched through. If the programmed TP transmitter reception is poor, the unit switches to automatic tracking until the programmed TP transmitter is receivable.
PAGE 10
Navigation CD 3.X Switching TP on/off Selecting automatic tracking In all modes and wavebands, TP can be switched on/off by pressing the 73 button for more than 2 seconds. TP can also be switched on/off in the TP - menu. In all modes and wavebands, automatic tracking can be switched on by pressing the 73 button for more than 2 seconds. To switch on automatic tracking in the TP menu, press the multifunction button repeatedly until ! 65 is dis!7 played.
PAGE 11
Navigation CD 3.X Selecting / deleting direct programming Switching TMC on/off Activate the TP menu. Selecting: Press the Note: ;( multifunction button. 1 1 E $ Activate the TP menu. !7 ;( #63 !4* ,+ Using the right rotary control , select the desired TP transmitter. After a short delay and without actuation, the selected transmitter is accepted. Deleting: Press the You can find further information on TMC under “Dynamic navigation with TMC” on page 19. ;( !7 multifunction button.
PAGE 12
Navigation CD 3.X Display for receivable TMC stations ! O Y 5; +; ,. 79 >9 SM MOT P If the system is able to receive a TMC station and TMC has been activated as described in “Switching TMC on/off” on page 24, this is indicated on the display by the abbreviation ! . TMC information can be received and analysed by the navigation system. The reception of these traffic announcements is free of charge.