User Guide

95
Navigation Operation
Selecting destination via post code
The destination can also be selected via the town’s post code.
Select the destination’s
 ! by turning the right ro-
tary control and press to confirm the selection.
Using the right rotary control , enter the post code for the
destination and press for more than 2 seconds to confirm the
entry. To confirm, the small tick can also be selected and
the right rotary control briefly pressed.
The display then shows either the destination corresponding
to the post code or, if the post code is shared among several
towns, a list containing these towns.
Select the required location using the right rotary control
and press to confirm.
If more than 20 locations share the same post code, the dis-
play will show the location input menu instead of the above-
mentioned list. In that case, the location name is to be entered
as described in ”Entering Destination” on page 93.
The program returns to road or centre entry. If there are no
streets in the selected town or only the centre can be selected,
the unit will switch directly to the route menu.
Entering Destination Road
Select
 with the right rotary control and press to con-
firm.
Select the letters one after the other by turning the right rotary
control and press to confirm. The selected letter appears
enlarged at the right of the display.
With the multifunction button , the last letter confirmed
is deleted.
The complete entry can be deleted by pressing the multifunc-
tion button for more than 2 seconds.
!

!
 !P
YY !"Y$Y&'
YYYYYYYYYYYYYYYYYYYYY

 "


!
P
 !"#$Y&'
YYYYYYYYYYYYYYYYYYYYY