User Guide

98
Navigation Operation
The centre nearest to the entry appears in capital letters in the
centre list.
The scroll marks indicate that other centres in alphabetical or-
der can be selected.
Select the centre by turning the right rotary control and
press to confirm.
Program switches to the Route menu.
Note: By pressing the right rotary control for more than
2 seconds without previously entering a letter, a list of
the possible location centres will immediately appear.
Destination input via coordinates
If the geographical coordinates (latitude and longitude) of a
destination are known, these can be entered and route
guidance to the destination started.
To enter the coordinates of the destination, select
! by turning the right-hand rotary control .
Press to confirm the selection.
Enter the latitude of the destination using the right-hand
rotary control . Entries must be made in degrees, minutes,
seconds and a direction as the crow flies, e.g.
11°38’34[[ N.
To confirm the entry, press and hold the right-hand rotary
control for more than 2 seconds. To confirm, the small
tick can also be selected and the right-hand rotary
control pressed briefly.
Enter the longitude of the destination using the right-hand
rotary control as described above.
 !

&
!!"P
YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYY
LONGITUDEP
YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYY