User Guide
117
Navigation Operation
Setting Time
In order to achieve correct navigation on routes with time-de-
pendent traffic guidance, and to calculate the estimated time
of arrival, it is necessary to set the GMT time transmitted
from satellites to the current time zone.
In the System Settings menu, select
! and confirm.
With the multifunction button the time can be changed
from 24- to 12-hour display.
The individual entries can be selected by pressing the multi-
function buttons or , the time will be changed
every half-hour.
By pressing the right rotary control or the multifunction
button the set time is accepted.
The program jumps back to the System Settings menu.
Save Position
Select and confirm
# ! in the System Settings
menu.
The display will show the co-ordinates (latitude/ longitude)
for the current position.
Re-confirm by once again pressing the right rotary control .
Entering a Name for Position.
Press the right rotary control for more than 2 seconds to
confirm the name entered. Entry can also be confirmed by the
selecting the small tick and briefly pressing the right rotary
control .
The Destination Memory is then called up automatically (see
page 111).
With the right rotary control , select the desired position in
the Destination Memory and press to confirm.
!
# !
EMMEOV
YY
Q 2.
EMMEOV
YY
Q 2.
Q
p
!
"P
OYOY
#
O
!"#$%&'
qFGHY