User Guide
134
Radio Mode
TP - Activating/ Exiting the TP Menu
Activating: Press the button (traffic announcements
cannot be transmitted).
Press the multifunction button .
Exiting: Press the button, or the TP menu will auto-
matically disappear after 8 seconds if no further operations
are performed.
Switching TP On/ Off
In all operations and wavebands, TP can be switched on or off
by pressing and holding the button for more than 2
seconds.
TP can also be switched on/off in the TP - menu.
Switching on: To switch on TP in the TP Menu, repeatedly
press the multifunction button until
!65 appears.
Switching off: To switch off TP in the TP Menu, repeatedly
press the multifunction button until
!6-- appears.
TP is switched off after returning to normal display.
Selecting Automatic Tracking
In all operations and wavebands, automatic tracking can be
switched on by pressing and holding the button for
more than 2 seconds.
To switch on automatic tracking in the TP Menu, repeatedly
press the multifunction button until
!65 appears.
Attention: If a TP transmitter has already been pro-
grammed directly, it will once again be selected
as the TP transmitter.
73
,+
!7 ;( #63 !4*
!7
73
73
!7
,+
!7 ;( #63 !4*
!7
,##
!7 ;( #63 !4*
73
!7
,+
!7 ;( #63 !4*